Lan Settings; Change The Lan Ip Address; Use The 4G Lte Router As A Dhcp Server - TP-Link Archer MR200 User Manual

Chapter 11

11. 3. LAN Settings

11. 3. 1. Change the LAN IP Address

The router is preset with a default LAN IP 192.168.1.1, which you can use to log in to its
web-based management page. The LAN IP address together with the Subnet Mask also
defines the subnet that the connected devices are on. If the IP address conflicts with
another device on your local network or your network requires a specific IP subnet, you
can change it.
Follow the steps below to change your IP address.
1. Visit http://tplinkmodem.net, and log in with the password you set for the router.
2. Go to Advanced
3. Type in a new
IP Address
4. Select the Subnet Mask
the IP address identifies the local IP subnet.
5. You can configure the router's
which you can also access the web management page.
6. Leave the rest of the default settings as they are.
7. Click Save to make the settings effective.

11. 3. 2. Use the 4G LTE Router as a DHCP Server

You can configure the router to act as a DHCP server to assign IP addresses to its clients.
To use the DHCP server function of the router, you must configure all computers on the
LAN to obtain an IP Address automatically.
Follow the steps below to configure DHCP server.
1. Visit http://tplinkmodem.net, and log in with the password you set for the router.
2. Go to Advanced
> Network > LAN Settings
appropriate to your needs.
from the drop-down list. The subnet mask together with
Second IP
> Network > LAN Settings
Specify Your Network Settings
page.
and Subnet Mask for LAN interface through
page.
49