Wi-Fi Setup (Da Vinci Mini W Only) - XYZ Printing DA VINCI MINI SERIES User Manual

8
The printing status, including the printing progress,
elapsed time, and remaining time, will be shown while
printing. You can pause or cancel the printing task in this
window.

Wi-Fi setup (da Vinci Mini w only)

●Pre-setup
1. The network printing function is only available when the printer and the
computer are both connected to the same wireless network.
2. Before connecting the printer, your wireless network settings need to be
adjusted. For more information, refer to the instruction manual of your
wireless router.
3. The wireless network's channel width needs to be set to 20 MHz for the
printer to connect to it wirelessly. Refer to the vendor instruction manual for
more information.
4. The Mini supports WEP, WPA, and WPA2 security encryption standards.
Wireless pass word information will be requested when setting up the
printer connection.
9
When done, "Printing Complete"
will be shown on screen.
• WEP • WPA • WPA2
10
After the print has finished,
use a scraper to remove the
printed object.
●Setting up Wi-Fi
Connect the printer to your computer with the USB cable, and open
1
"XYZware".
Click the "Printer Monitor" button on the lower right corner on the
2
screen, open "Operation Function".
3
Select the "Printer Monitor" icon to open the Wi-Fi connection settings.
- 7 -