DeWalt DWMT70777 Instruction Manual page 4

WARNING:
• All persons in the work area must always wear approved eye
and hearing protection and approved respiratory protection
when this spray gun is in operation.
• Never aim spray gun at anyone. Do not spray near sparks, open
flame, lit cigarettes, pilot lights, space heaters or any other
potential ignition source, DO NOT SMOkE IN WORk AREA.
• Only persons well acquainted with these rules of safe operation
should be allowed to use the air tool.
• Follow manufacturers instructions and safety information to
ensure safe handling and proper use of paints, laquers, thinners,
base coats, etc. Do not use latex or other heavy paints. They are
not recommended for this spray gun.
• Always keep work area free from obstructions and well
ventiilated.
• Always disconnect spray gun from air source before
disassembly.
• To avoid creating an explosive atmosphere, work only in well
ventilated areas.
• Always use respiratory protection to prevent inhalation of
harmful fumes and materials.
CAUTION:
• Before disassembly or removal of any part of gun or attached
components, shut off compressor, release pressure by
depressing trigger, and disconnect power source. NEVER
assume system pressure is zero!
WARNING: RISk Of ExPlOSION OR fIRE
WHaT can HaPPen
• When paints or materials
are sprayed, they are broken
into very small particles
and mixed with air. This
will cause certain paints
and materials to become
extremely flammable and
could result in serious
injury or death.
• The solvents
1,1,1-Trichloroethane and
Methylene Chloride can
chemically react with the
aluminum used in most
spray equipment, and this
gun and cup, to produce an
explosion hazard and
could result in serious
injury or death.
4
HoW To PreVenT IT
• Never spray near open
flames or pilot lights in
stoves or heaters.
• Never smoke while spraying.
• Provide ample ventilation
when spraying indoors.
• Read the label or data
sheet for the material
you intend to spray.
• Never use any type of spray
coating material containing
these solvents.
• Never use these solvents
for equipment cleaning
or flushing.
• If in doubt as to whether a
material is compatible,
contact your material supplier.