UPM
The UPM is the upstream modem address. The value used for the UPM is the same as the
terminal ID assigned by the DAC 6000. The UPM is a unique, system-generated, eight-digit
integer between 1 and 16777215.
00000000 is displayed when the UPM is not configured or unknown.
UPSTREAM ID
The UPSTREAM ID is a DCT* transmission parameter assigned by the DAC 6000 for the
interactive DCT*. The UPSTREAM ID is a four-digit decimal value ranging from 0000 to 9999.
0000 is displayed if the UPSTREAM ID is not configured or unknown.
DOWNSTREAM ID
The DOWNSTREAM ID is a DCT* transmission parameter assigned by the DAC 6000 for the
interactive DCT*. The DOWNSTREAM ID is a four-digit decimal value ranging from 0000 to
9999.
0000 is displayed if the DOWNSTREAM ID is not configured or unknown.
STATE
Indicates the interactive status of the DCT*:
LED
OSD
U
UNCONFIG
C
MAC_CONNECT
I dc
INIT_WAIT_DC_OR_C
I L
WAIT_LM_ACK
I SO
WAIT_SO_ACK
I LA
WAIT_LA_OR_SO
S I
INIT_STOPPED
r dc
RUN_WAIT_DC_OR_C
r
RUNNING
S
RUN_STOPPED
00
INVALID
State Description
DCT* is not configured for the interactive system and platform
should run as Pre-Interactive.
DCT* is waiting to establish connection to MAC Pid Stream.
DCT* is running in the interactive initialization state and
waiting for the default configuration or the contention channel
list messages.
DCT* is running in the interactive initialization state and
waiting for Link Management Response ACK for Local
Address Message.
DCT* is running in the interactive initialization state and
waiting for a Sign On acknowledgement.
DCT* is running in the interactive initialization state and
waiting for Logical Address or Sign On with verification
Frequency message.
DCT* is in the interactive initialization state and the
TransMode has stopped.
DCT* is running in the interactive state and waiting for the
default configuration or the contention channel list messages.
DCT* interactive state is running, sending idle messages, and
waiting for any Prepare for Poll or MAC messages.
DCT* interactive run state has stopped and DCT* is waiting
for status or transmission control message.
Set-top interactive state is unknown or invalid.
Diagnostics
DCT6200\DCT6208 Installation Manual
4-41