Related Manuals for EverFocus EHD930F eZ.HD Series
Summary of Contents for EverFocus EHD930F eZ.HD Series
- Page 1 EHD930F eZ.HD Series 1080p Full High Definition True Day/Night Outdoor IR Vandal Dome Camera User’s Manual Copyright © EverFocus Electronics Corp. Release Date: February 2016...
- Page 2 Precautions Do not install the camera near electric or magnetic fields. Install the camera away from TV/radio transmitters, magnets, electric motors, transformers and audio speakers since the electromagnetic fields generated from these devices may distort the video image or otherwise interfere with camera operation. Never disassemble the camera beyond the recommendations in this manual nor introduce materials other than those recommended herein.
- Page 3 Safety Notice Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
-
Page 4: Table Of Contents
Contents 1. Introduction........................5 Packing List ........................5 Features .......................... 5 2. Cable Description ......................6 3. Installation ........................7 Installation and Adjustment ................... 7 4. Configuration in the OSD Menu ..................12 5. Specifications ........................16... -
Page 5: Introduction
EHD930F eZ.HD Vandal Dome Camera 1. Introduction The EverFocus eZ.HD Series EHD930F provides incredible performance in bright light or low light environments, and the resolution listed in the specification from the actual camera you install. To take full advantage of the amazing resolution available from this advanced imaging technology, the EverFocus eZ.HD Series EHD930F uses a vari-focal lens together with 1/2.9"... -
Page 6: Cable Description
EHD930F eZ.HD Vandal Dome Camera 3D Noise Reduction ensures less blurry moving subjects, vivid and high SN ratio images even under low light environment Support 1080p, 720p & 960H analog signal output, which can be easily switched using OSD Joystick The flexible angle viewing with its 3 Axis rotation design allows wall or ceiling mounting ... -
Page 7: Installation
EHD930F eZ.HD Vandal Dome Camera 3. Installation 3.1 Installation and Adjustment To remove the Cover Cap, unscrew the three Set Screws using the supplied Hexagon Wrench. For Ceiling Mount / Wall Mount users: Stick the Template Plate on the position where you want to attach the camera, drill four holes on the Template Plate for screwing the Adapter Plate with the supplied Screws and Plastic Anchors. - Page 8 EHD930F eZ.HD Vandal Dome Camera To screw the camera onto a Junction Box or using a Bracket: a. You can optionally screw the camera to the wall using an L-Shaped Mounting Bracket. b. Screw the supplied Adapter Plate to the Junction Box or the L-Shaped Mounting Bracket using the screw holes on the Adapter Plate.
- Page 9 EHD930F eZ.HD Vandal Dome Camera Screw the camera to the Adapter Plate. Connect the camera to an AHD DVR with the 12VDC or 24VAC power source using the supplied DC power pigtail cable or a power adapter. Using the Test Lead for viewing the video image while adjusting camera angles. You can also use the OSD Menu Joystick to configure camera settings.
- Page 10 EHD930F eZ.HD Vandal Dome Camera b. Configure the camera settings using the OSD Menu Joystick, connect one end of the Test Lead to the Test-Out connector on the camera module and the other end to the portable monitor. • Push the Joystick up / down to select among menu items.
- Page 11 EHD930F eZ.HD Vandal Dome Camera 9. Take out the supplied Desiccant Bag (figure 2) from the outer packing (figure 1). Fold the Desiccant Bag (figure 3) and put it into the camera housing (figure 4). Note: It’s recommended to close the cover cap immediately in case of reducing the absorption capacity of the desiccant bag inside the camera .
-
Page 12: Configuration In The Osd Menu
EHD930F eZ.HD Vandal Dome Camera 4. Configuration in the OSD Menu You can use the Joystick on the rear panel of the camera to configure camera settings in the OSD menu. For details on the OSD menu structure as below: No. - Page 13 EHD930F eZ.HD Vandal Dome Camera Level Middle, High, Low Area Position, Size,↑,↓,→,← Default Select Area1, Area2, Area3, Area4 Display Position, Size,↑,↓,→,← Black Mask On/Off HSBLC Level 0-100 All Day Model Night AGC Level 0-255 Default AWC→SET Indoor White Outdoor Balance Blue 1-500 Manual...
- Page 14 EHD930F eZ.HD Vandal Dome Camera Mirror Off, Mirror, V-flip, Rotate Neg. Image Off/On Select Area1,Area2,Area3,Area4 Position, Size,↑,↓,→,← Display Sensitiv 0-100 Color Green, Blue, White, Red Motion 1.00,0.75,0.50, Trans 0.25 View Type Off, Block, Outline, All OSD View On/Off Alarm Alarm Out On/Off Time 1-15...
- Page 15 EHD930F eZ.HD Vandal Dome Camera x2, x4, x6, x8,x10, x15, x20, Sens-up x25, x30 Pos/Siz Position, Size,↑,↓,→,← Black DPC Start Press Enter DPC View Off/On Level 0-255 CAM ID 0-255 RS485 ID Display Off/On Baud Rate 2400,4800,9600,19200 ,38400 Level 0-10 Sharpness Auto Start AGC...
-
Page 16: Specifications
EHD930F eZ.HD Vandal Dome Camera 5. Specifications EHD930F Pickup Device 1/2.9" SONY 2.24M pixels CMOS Video Format NTSC and PAL( can be switched via OSD) Effective Pixels 1920 (H)*1080(V) Scanning System Progressive Scan Sensitivity 0 lux with IR on S/N Ratio Over 48 dB (AGC OFF) Electronic Shutter Auto/Manual (X30~1/50,000)/FLK... - Page 17 FAX: +1 626 844 8838 FAX: +81 3 5625 8189 www.everfocus.com www.everfocus.co.jp sales@everfocus.com info@everfocus.co.jp Your EverFocus product is designed and Ihr EverFocus Produkt wurde entwickelt und hergestellt mit manufactured with high quality materials qualitativ hochwertigen Materialien and components which can be recycled and reused.
Need help?
Do you have a question about the EHD930F eZ.HD Series and is the answer not in the manual?
Questions and answers