Customizing Controllers; Korg Kontrol Editor Software; Types Of Parameters - Korg nanoKONTROL Studio Owner's Manual

Hide thumbs Also See for nanoKONTROL Studio:

Table of Contents

The KORG KONTROL Editor software is required to customize the

operation of the nanoKONTROL Studio. Download the software

from the Korg website (http://www.korg.com/), and install the soft-

ware by following the instructions in the supplied document.

TIP For details on installing and using the KORG KONTROL Edi-

tor software, refer to the instruction manual for that soft-

ware.

Customizing Controllers

The nanoKONTROL Studio contains two types of customizable pa-

rameters. Scene Parameters address the function of specific con-

trollers inside of the selected Scene. Global Parameters control the

overall operation of the nanoKONTROL Studio, regardless of the

selected scene.

Scene Parameters

These parameters determine what the nanoKONTROL Studio

does when you operate a controller in assignable mode. Five

scene parameters can be saved on the nanoKONTROL Studio.

By preparing scene parameters for each software that you use,

you can instantly switch the settings.

Global Parameters

These parameters specify general behavior of the

nanoKONTROL Studio, such as energy-saving features. The

global parameters will be shared among all scenes.

Table of Contents

Show Quick Links

Table of Contents

Do you have a question about the nanoKONTROL Studio and is the answer not in the manual?