Smartphone Integration; Smartphone Connect App - Panasonic KX-PRW130 Operating Instructions Manual

Smartphone Integration
performing this procedure, and then
change it back when finished.
3 [
~
]:
Select your wireless router's SSID.
~[Select]
4
Confirm the SSID and then press [OK].
5
Enter the password required to access
the wireless network.
~
[OK]
• After the base unit connects to the
wireless router, "Connected to" and
your wireless router's SSID is
displayed.
6
[OFF]
Simplified configuration (WPS,
DHCP)
This procedure requires a wireless router that
supports WPS. If your wireless router supports
WPS, make sure the feature is turned on, and
locate its WPS button before beginning this
procedure. The WPS button is typically
labeled "WPS" or has two curved arrows on it.
Program this setting using either the base unit
or one of the handsets. (Fewer operations are
needed when using the base unit.)
1
Press the WPS button on your wireless
router.
2
Press and hold
[Wi-Fi SETUP]
button on
the base unit for about 5 seconds and
then wait for a long beep to sound.
1
[Menu]
(right soft key)
[!][§][2][11
2
[~]:
''WPS (Easy
setting)"~
[Select]
3
Press the WPS button on your wireless
router and then press [OK] on the
handset.
• The base unit searches for your
wireless router and "Searching ... "
is displayed.
• After the wireless router is found, the
base unit's Wi-Fi settings will be
completed automatically. When the
setup is complete, "Connected to"
and your wireless router's SSID are
displayed.
4
[OFF]
Advanced configuration (static IP
settings)
After using the procedure explained in "Typical
configuration (DHCP)", page 43 or "Simplified
configuration (WPS, DHCP)", page 44, use
the procedure below to set the base unit's IP
settings manually if necessary.
This procedure is not necessary for most
users.
1
[Menu]
(right soft key)
[!][§][Q][Q]
2 [
~
]:
''Manual (Static)"
~
[Select]
3
[~]:Select the desired item.~
[Select]
4
Enter the desired setting. ~ [OK]
• Press [ ........ ] to move the cursor if
necessary.
5
Set the other items as necessary.
6 [~]:"<Save>"~ [Select]~
[OFF]
Smartphone Connect app
Once you have configured the base unit's
Wi-Fi and network settings, you are ready to
download the Smartphone Connect app.
Download information is available at the web
page listed below.
[!] .. [!]
www .panasonic. net/pee/support/tel/air
For information about using the app, refer to
the Smartphone Connect App Guide, which is
available for download at the web page listed
above.
44 For assistance, please visit http://www.panasonic.com/help