Table of Contents
Advertisement
The LEDs blink blue while the disks spin up. You can start using the storage once all LEDs are solid blue.
POWERING OFF THE LACIE 5BIG HARD DRIVES: IDLE MODE
1.
Make certain that the LaCie 5big is not in use and that there are no active transfers.
2.
Eject the LaCie 5big volumes from your computer.
3.
Apply a short push on the power button. See the explanation below regarding a short push and a long push.
4.
The status LED will blink slowly while the disk LEDs turn off.
You can daisy chain Thunderbolt 2 and first generation Thunderbolt devices when the LaCie 5big is in idle mode.
POWERING OFF THE LACIE 5BIG ENCLOSURE
1.
Make certain that the LaCie 5big is not in use and that there are no active transfers.
2.
Eject the LaCie 5big volumes from your computer.
3.
Apply a short push on the power button. See the explanation below regarding a short push and a long push.
The status LED will blink slowly while the disk LEDs will turn off.
4.
It is now safe to unplug the power and/or Thunderbolt cables from the device.
LaCie 5big Thunderbolt 2 User Manual
22
- Quick Links:
- Hard Drive Maintenance
- Replacing a Hard Drive
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 5BIG THUNDERBOLT 2 and is the answer not in the manual?
Questions and answers