Mitsubishi Electric MJ-E14CG-S1-SWE Instruction Manual page 24

Maintenance (Cont.)
Silver ion filter
1
Remove the front panel and
pre-filter.
1 Remove by holding
the bottom.
2
Remove the silver ion filter.
3
Soak the silver ion filter in
water.
Do not use detergent or hot water.
Also, do not brush or rub while
soaking as this may damage the filter.
• Stains may remain on the filter, but should not
affect performance.
• The filter can be soaked for a total of eight
times.
After that, replace with a new filter.
4
Once every three months
Front panel Pre-filter
2 Remove by
holding the
tabs.
Performance is
unaffected even if the
metal fins inside the main
unit are slightly bent.
Silver ion filter
Pre-filter
Soak in cool to
lukewarm water for 30
minutes.
Soak in water the filter about once every three months.
4
Dry the silver ion filter.
Do not hang with pegs as this may
damage the filter.
Do not use the filter while wet.
5
Fit the silver ion filter.
With the strips facing up, set the
silver ion filter inside the tabs on the
pre-filter.
6
Attach the pre-filter and front
panel.
1 Attach by holding
the tabs.
Tabs (6)
2 Hook the top edge
to the top part of
the unit and push
the bottom in.