Related Manuals for Numark CDN15
Summary of Contents for Numark CDN15
- Page 1 CDN15/MPCD3 PROFESSIONAL CD PLAYERS USER’S MANUAL ©2002 Industries http://www.numark.com...
-
Page 2: Safety Instructions
Grounding or Polarization - Precautions should be taken so that the grounding or polarization means built into the CD player is not defeated. Internal/External Voltage Selectors - Internal or external voltage selector switches, if any, should only be reset and re-equipped with a proper plug for alternative voltage by a qualified service technician. -
Page 3: Introduction And Registration
PROFESSIONAL CD PLAYERS CONGRATULATIONS... You have just purchased a CD player designed specifically for the professional DJ. This unit has been designed to provide CD mixing with the same ease and creativity that you have enjoyed with records. Please take a few moments to familiarize yourself with your CD Player by reading the following information before attempting to operate the unit. -
Page 4: Table Of Contents
Play, Pause and Cue Operations Matching the Tempo Beat Matching Using Pitch Bend Example of Mixing Before Switching off the Power Troubleshooting Guide Information and Specifications Warranty ©2002 Numark Industries TABLE OF CONTENTS - The Leader in DJ Technology - 4 - http://www.numark.com... -
Page 5: Set-Up & Connections
3. Your CD player can be affected by excess vibration so mount the units in a secure environment if possible. 4. Connect the line output connections using the supplied audio cable from the CD Player to the line inputs of your mixer. -
Page 6: Front Panel Features
The faster you rotate the wheel the more pitch is changed. Releasing the wheel results in a return to the original pitch. ©2002 Numark Industries - The Leader in DJ Technology - 6 -... - Page 7 17. Infrared Remote Receiver (MPCD3 only): Used with wireless remote control to adjust functions of the unit. Should be kept clear of objects that might block the infrared beam of the remote control. ©2002 Numark Industries - The Leader in DJ Technology...
-
Page 8: Rear Panel
19. Voltage Selector: Set this switch to the voltage for your location. 20. RCA Audio Connectors: Connect your CD player to your mixer from this line level output. 21. Relay Connector (MPCD3 only): To use connect a relay cable between two units as described in the setup section of this manual. -
Page 9: Display Features
6. MINUTES: Shows the minutes elapsed or remaining depending on mode setting. 7. SECONDS: Shows the seconds elapsed or remaining depending on mode setting. 8. FRAMES: The CD Player breaks down a second into 75 frames for accurate cueing. This shows the frames elapsed or remaining depending on mode setting. -
Page 10: Mp3 Audio Information
7. If the disc is burned with both MP3 and CDDA (Digital Audio) music, then it will be recognized according to the first track. For example, if the first track is CDDA music the unit will play CDDA music only. ©2002 Numark Industries - The Leader in DJ Technology - 10 -... -
Page 11: Play, Pause And Cue Operations
EDITING CUE POINT When the jog wheel is turned while a cue point is set, a new cue point can be located. The CD player will repeatedly play small parts of the CD as you move it to the desired position. By pressing “PLAY/PAUSE” then “CUE” you can confirm that this new cue point is desirable. -
Page 12: Matching The Beats Per Minute (Bpm)
Match the tempo by monitoring the music of two CD Players by ear and adjusting the pitch. When the tempo of the music of the selected CD player is slow compared to the tempo of the other player, move the slider to the “+” side and match the tempo. -
Page 13: Example Of Mixing
PLAYER 2 Press the Pause button of Check you new cue point Listen with the monitor and Do a MIX! With a matching downbeat ©2002 Numark Industries PLAYER 1 OPEN/CLOSE button. PLAYER 2 OPEN/CLOSE button. PLAYER 2 Press search and rotate PLAYER 2. -
Page 14: Before Switching Off The Power
CDN15/MPCD3 BEFORE SWITCHING OFF THE POWER: When you have finished using the CD player, be sure that the disc tray is closed with the “OPEN/CLOSE” button before switching off the power. DO NOT switch off the power when the disc holder is open. -
Page 15: Information And Specifications
Weight: Power Supply: Power Consumption: * Specifications are subject to change due to ongoing improvements ©2002 Numark Industries Standard Compact discs (12 cm & 8 cm) Track Elapsed, Track Remain, or Total Remain 1 bit linear/Channel, 3 Beam Laser 8 Times 44.1 kHz... -
Page 16: Warranty
Professional Disc Jockey Products What is covered and for how long? NUMARK INDUSTRIES LCC ("NUMARK") warrants to the original purchaser that NUMARK'S DJ Mixers, Amplifiers, CD players, turntables, preamplifiers, beatkeepers, equalizers, microphones, headphones, and all other accessories are free from defects in material and workmanship under normal use and service for the period commencing upon the date of purchase from an authorized NUMARK dealer and continuing for the following period of time after that date for (1) Year.
Need help?
Do you have a question about the CDN15 and is the answer not in the manual?
Questions and answers