Step 3: Connecting The Tv; Video Cord - Sony dav-is10 Operating Instructions Manual

Step 3: Connecting the TV

The following is the basic connection of the control unit and TV. For other TV connections, see
page 21. For other component connections, see page 24.
: Video signal flow
: Audio signal flow
Required cords
A

Video cord

.
This connection sends the image to the TV. Connect the VIDEO OUT (VIDEO) jack of the control unit
to the VIDEO IN jack of the TV.
B Audio cord (not supplied)
This connection sends TV sound to the system. You can enjoy TV sound from the speakers with this
connection. Connect the TV (AUDIO IN) jacks of the control unit to the AUDIO OUT jacks of the TV.
Note
• When connecting the jack, insert the plug into the jack as far as it will go.
Example
Downloaded From TheatreSystem-Manual.com Manuals
B
DMPORT
Rear of the control unit
AUDIO
OUT
L
R
A
Yellow
White (L/audio)
Red (R/audio)
Incorrect
Correct
TV
VIDEO
IN
17
GB