Installing The Main Unit - Samsung ht-x250 Instruction Manual

Installing the Main Unit

Method 1 : Installing the Stand so that the DVD Player Lays Flat.
Preparation
Disconnect the AC power cord from the AC outlet before installing the main unit.
Connect the cables before installation.
1 2 3
16
Downloaded From TheatreSystem-Manual.com Manuals
4
1
Turn the stand counter-clockwise and pull it apart.
The DVD Player and stand are separated.
2
Hold the DVD Player and stand as shown by the figure and turn
the right side of the stand upward so that it is slightly slanted.
3
Insert the 2 stand anchors into the holes on the back of the
DVD Player.
4
Turn the right side of the stand clockwise to fix it to the back of the
DVD Player.
• Be careful not to scratch the surface the DVD Player when installing
the stand.
• Do not turn the DVD Player left or right as it may separate it from the stand.
Method 2 : Installing the Stand so that the DVD Player Stands up.
: Preparation
Disconnect the AC power cord from the AC outlet before installing the main unit.
Connect the cables before installation.
1
Arranging the Cables
2 3 4
1
Turn the stand in the direction of the arrow and pull it apart.
The DVD player and stand are separated.
2
Lift the right side of the stand so that it is slightly slanted.
3
Insert the 2 stand anchors into the holes on the bottom of the
DVD Player.
4
Turn the right side of the stand clockwise to fix it to the bottom of
the DVD Player.
Use the cable tie to keep the cables together.
ENG
:
17