Apexis APM-H.264 Quick Installation Manual

APM-H.264 quick installation guide

1 Hardware installation

1.1 Open the package and take the ipcam and accessories out, First install

the ipcam wireless antenna

1.2 Fix the ip camera, insert one end of the network cable to the camera tail

Ethernet card interface, on the other end of the network interface connected

to a router or switch.

1.3 The software of IP Camera support windows xp/windows8/windows7 etc.

operation system, Pls use the power adapter to connect the DC5V port on the

back of the ip camera. Plug the other end to an electrical outlet. Check the

card's power indicator light (yellow) and the network indicator (green) is

working properly, the camera pan and tilt rotate automatically.

OCX will be downloaded automatically when users login the IP Camera, so

users have to set the IE browser to enable the OCX be downloaded

automatically after signing in. Steps as below:

1. Close the firewall of your computer.

2. Change the ActiveX settings, "IE" browser > "Tool" > "Internet Options" >

"Security"> "Custom Level" > "ActiveX control and Plug-ins", all the ActiveX

options set to be "Enable":

Table of Contents

Do you have a question about the APM-H.264 and is the answer not in the manual?

Page 1 APM-H.264 quick installation guide 1 Hardware installation 1.1 Open the package and take the ipcam and accessories out, First install the ipcam wireless antenna 1.2 Fix the ip camera, insert one end of the network cable to the camera tail Ethernet card interface, on the other end of the network interface connected to a router or switch.
Page 2 Especially: Enable: Download unsigned ActiveX controls Enable: Initialize and script ActiveX controls not marked as safe Enable: Run ActiveX controls and plu-ins Figure1.3 Figure1.4 In addition: you can also click “Start” menu>“Internet Explorer”, choose “Internet attributes “ to enter, or via “Control Panel” >“Internet Explorer”, enter to Security setting.
Page 3 “ ” files 2.4. IPCam IP Address Search Tool Step 1: Use tool “SearchIPCam.exe” to find IP address of LAN. Figure1.5 Step 2: Double click “Search IPCam”, camera IP & MAC list will be displayed. If you want to re-search, click “Search” again. Figure1.6 Step 3: Choose the IP, click “Login”...
Page 4 Figure1.7 2.5. Install the OCX ActiveX Install the OCX activeX for the first time login; click the icon on the right bottom, Download the OCX file , After that, double click to install it automatically. If you using win7 or win8 , you could be running to the ActiveX as an administrator After OCX installed fully, then input the user name and password to login the camera.
Page 5 ：Click to login the IE interface as below:...