Display Link-Delay; Display Loopback-Detection - H3C s3100 series Command Manual

display link-delay

Syntax
display link-delay
View
Any view
Parameters
None
Description
Use the display link-delay command to display the information about the ports with the link-delay
command configured, including the port name and the configured delay.
Related commands: link-delay.
Examples
# Display the information about the ports with the link-delay command configured.
<Sysname> display link-delay
Interface
===================== ==============
Ethernet1/0/5

display loopback-detection

Syntax
display loopback-detection
View
Any view
Parameter
None
Description
Use the display loopback-detection command to display the loopback detection status on the port. If
loopback detection is enabled, this information will also be displayed: time interval for loopback
detection and the loopback ports.
Example
# Display the loopback detection status on the port.
<Sysname> display loopback-detection
Port Ethernet1/0/1 loopback-detection is running
system Loopback-detection is running
Detection interval time is 30 seconds
There is no port existing loopback link
Time Delay
8
1-11