Turning Services On And Off Using Feature Codes; Viewing The Active Services From A Two-Line Display Telephone - Nortel M7410 Installation And Maintenance Manual

96 Using System features
Each schedule can have its own configuration of a Service which works
independently of automatic start and stop times. For example, there may be a
version of Restriction service called Night Schedule that prevents anyone from
making long distance calls. But calling it Night Schedule does not mean it can only
be used with a schedule. You can turn the Night Schedule for Restriction Service
on or off as needed any time of the day or night. If you decide to run a service on a
schedule, the system uses the start and stop times used for that schedule.

Turning Services on and off using feature codes

The master control for services is accessed from the Unified Manager. Day-to-day
use of Services is controlled using the following feature codes.
ƒ°‡⁄
ƒ£°‡⁄
ƒ°‡¤
ƒ£°‡¤
ƒ°‡‹
ƒ£°‡‹
To turn a Service on:
1. Enter the appropriate feature code from a control telephone.
2. Press
NEXT
of the service you want to be turned on.
3. Press to select the setting, or press
OK
any changes.
To turn a Service off:
1. Enter the appropriate feature code from a control telephone.

Viewing the active Services from a two-line display telephone

When a Service is active, the control telephone display reads
1. Press . The display shows the first active Service and the schedule that is
LIST
in use.
Enterprise Edge Feature Programming Telephone Guide
Turns on Ringing service. When used at the
direct-dial telephone, it activates the alternate
direct-dial telephone (extra-dial telephone).
Turns off Ringing service.
Turns on Restriction service.
Turns off Restriction service.
Turns on Routing service.
Turns off Routing service.
to move through the schedules until the display shows the version
Do not confuse activating Normal service with canceling a Service.
Setting a Service to Normal is not the same as canceling a Service using a
feature code. If you set the Service to Normal, the normal version of a
Service overrides any automatic schedule and remains in effect until you
manually cancel it. If you cancel the Service, you return to the automatic
schedule.
to exit the feature without making
QUIT
Services ON
.
P0908510 Issue 02