Care And Cleaning - Kenwood FDM10 Manual

bm
4 Fit the lid and turn clockwise to
6
lock .
5 Place a bowl under the food outlet
bo
.
6 Cut the food to fit the feed tube.
7 Slide the on/off lever
the ON position
8 Push down evenly with the pusher
– never put your fingers in
the feed tube.
Reverse the above procedure to
dismantle the unit.
Always unplug the power
G
unit before removing the lid.
important
If the food is not exiting the
food outlet, switch off and
check that food is not
clogging under the disc.
Clear any trapped food
before continuing to
process.
Do not run the direct serve
G
attachment continuously for
longer than 60 seconds.
Leave to cool for 2 minutes
in between each 60 second
operation.
hints
Always use fresh ingredients
G
Don't cut food up too small. Fill the
G
width of the large feed tube fairly
full. This prevents the food from
slipping sideways during
processing.
There will always be a small
G
amount of waste left on the disc
after processing.

care and cleaning

Always switch off and unplug
G
before cleaning.
Handle the blades and disc
G
with care - they are
extremely sharp.
Some foods may discolour the
G
plastic. This is perfectly normal and
won't harm the plastic or affect the
flavour of your food. Rubbing with
a cloth dipped in vegetable oil may
help remove the discolouration.
bn
and lock in
7
.
power unit
Wipe with a damp cloth, then dry.
G
Do not immerse the power unit in
G
water.
Push excess cord into the base of
G
the power unit.
food chopper - lid/bowl/knife
blade
Always separate the upper knife
blade from the lower knife blade
before cleaning. Take care the
blades are very sharp.
Wash parts by hand, then dry.
G
The parts are unsuitable for use in
G
a Steam Steriliser. Instead use a
sterilising solution in accordance
with the sterilising solutions
manufacturer's instructions.
direct serve attachment
Dismantle the attachment fully
before cleaning.
For easier cleaning always wash
G
the parts immediately after use.
Handle the cutting disc with care –
G
it is extremely sharp.
Wash all the parts by hand, then
G
dry thoroughly.
If the direct serve adaptor is
G
immersed in water, ensure that all
the water has drained out before
reassembling the attachment.
Dishwasher Safe Parts
Dishwasher safe parts can be
washed on the top rack of your
dishwasher.
A short low temperature (Maximum
50°C) programme is
recommended.
item
Bowl
Food chopper lid
Direct serve lid
Knife blades
Disc
Direct serve adaptor
Pusher
Spatula
6
suitable for
dishwashing