Peachtree NOVA User Manual page 8

1
1
Power ON/OFF Switch: Connects and disconnects AC INPUT to the unit when the
B Power ON/OFF Switch: Connects and disconnects AC INPUT to the unit when the
B
power cord is connected between the AC INPUT and a 100-240VAC 50/60Hz AC
power cord is connected between the AC INPUT and a 100-240VAC 50/60Hz AC
outlet.
outlet.
AC INPUT & Fuse Holder: For connection to a 100-240VAC 50/60Hz AC outlet using
AC INPUT & Fuse Holder: For connection to a 100-240VAC 50/60Hz AC outlet using
C
C
the included power cord. The fuse can be replaced after turning the POWER switch
the included power cord. The fuse can be replaced after turning the POWER switch
OFF and removing the power cord from the AC INPUT. The fuse value for 100-120VAC
OFF and removing the power cord from the AC INPUT. The fuse value for 100-120VAC
operation is: 6.3A/250V, IEC time lag, high-breaking capacity. The fuse value for 220-
operation is: 6.3A/250V, IEC time lag, high-breaking capacity. The fuse value for 220-
240VAC operation is: 3.15A/250V, IEC time lag, enhanced-breaking capacity. Caution:
240VAC operation is: 3.15A/250V, IEC time lag, enhanced-breaking capacity. Caution:
using an improper fuse value may cause damage to the unit. Peachtree Audio accepts
using an improper fuse value may cause damage to the unit. Peachtree Audio accepts
no responsibility for any damaged caused by the use of improper fuse vales.
no responsibility for any damaged caused by the use of improper fuse vales.
ANTENNA: RF input connector for use with Peachtree's optional Wi-Fi module. Please
ANTENNA: RF input connector for use with Peachtree's optional Wi-Fi module. Please
D
D
refer to the instructions included with the Wi-Fi module for additional information.
refer to the instructions included with the Wi-Fi module for additional information.
IR INPUT: Accepts 3.5mm input from an Infra-Red (IR) repeater/distribution system.
IR INPUT: Accepts 3.5mm input from an Infra-Red (IR) repeater/distribution system.
E
E
Insert one end of a 3.5mm cable into this port and connect the other end to the output
Insert one end of a 3.5mm cable into this port and connect the other end to the output
of the IR repeater/distribution system. This input allows IR commands to control the unit
of the IR repeater/distribution system. This input allows IR commands to control the unit
when the IR window on the front panel is not in "line-of-sight" of the remote control. This
when the IR window on the front panel is not in "line-of-sight" of the remote control. This
is common when the nova is located in an enclosed cabinet or a different room. Please
is common when the nova is located in an enclosed cabinet or a different room. Please
contact us if you need more technical details regarding the IR protocol.
contact us if you need more technical details regarding the IR protocol.
12V TRIGGER OUTPUT:
12V TRIGGER OUTPUT:
F
F
trigger input. Insert one end of a 3.5mm cable into this output and connect the other
trigger input. Insert one end of a 3.5mm cable into this output and connect the other
end to a 12V trigger input of the product to be controlled. Once connected, both
end to a 12V trigger input of the product to be controlled. Once connected, both
products should power on and off when using the nova on/standby button on the front
products should power on and off when using the nova on/standby button on the front
panel or remote control.
panel or remote control.
SERVICE ONLY: This is NOT a USB audio input! Reserved for service use. Note: This
SERVICE ONLY: This is NOT a USB audio input! Reserved for service use. Note: This
G
G
port may also be used to provide 5V DC to power the optional Peachtree Audio Bt1
port may also be used to provide 5V DC to power the optional Peachtree Audio Bt1
Bluetooth module or other USB device that draws up to 5V/500mA (2.5 Watts) of
Bluetooth module or other USB device that draws up to 5V/500mA (2.5 Watts) of
power.
power.
USB-A INPUT: Accepts digital audio input from compatible mobile devices. Works with
USB-A INPUT: Accepts digital audio input from compatible mobile devices. Works with
H
H
iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5,
iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5,
BACK PANEL
2 3 4 5
3 4
2
Enables power on/off control of another product with a 12V
Enables power on/off control of another product with a 12V
BACK PANEL
6 7 8 9 10
5 6 7 8 9
17
17
11 12 13
10 11 12
14 15 16
13 14 15
16