Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for NetComm ROADSTER 56K
Summary of Contents for NetComm ROADSTER 56K
- Page 1 NetComm RoadsteR seRies 56K USB Modem User Guide...
-
Page 2: Table Of Contents
Please be responsible and protect our environment. table of Contents INTRODUCTION ...4 SYSTEM REQUIREMENTS ...5 PaCKaGe iNC�Udes ...5 HaRdWaRe setUP ...6 COMMANDS ...9 TROUBLESHOOTING ...14 APPENDIX A: ...16 APPENDIX B: ...17 NetComm Roadster series 56K UsB modem �m�5�6� �m�5�6� 5�6� www.netcomm.com.au... - Page 3 INTRODUCTION Please allow me to introduce myself...
-
Page 4: Introduction
The AM5067 - 56Kbps Voice/Fax/Data USB Modem connects your computer to the Internet, all kinds of BBS, and other fax modems. This manual describes the features, and at Commands Features & Specifications: General Description • aGeRe olympia sV9U / 1�� chipset solution •... -
Page 5: System Requirements
�m�5�6� 5�6� www.netcomm.com.au NetComm Roadster Series 56K USB Modem NetComm Roadster series 56K UsB modem NetComm Roadster series 56K UsB modem NetComm Roadster series 56K UsB modem... -
Page 6: Hardware Setup
Locate an available RJ-11 modular jack telephone outlet. b. Insert one end of the modular cord that came with your USB 56Kbps modem into the RJ-11 modular jack marked “LINE” on the modem. Then plug the other end into the modular jack on wall outlet. See below Figure. - Page 7 “Add New Hardware Wizard”. Click on Cancel. 3. Please insert the UsB 56Kbps modem Utility Cd into your Cd-Rom driver. 4. The CD should auto-start, displaying the following windows. If it does not start properly, please click on Start – Run and type in CD:\autorun.exe (where CD is as the location of the CD-ROM driver) .
- Page 8 COMMANDS This is where you take control...
-
Page 9: Commands
A/—Repeat Last Command Use this command to repeat the last at command. the modem repeats the command currently in the command buffer. do not use the at prefix with this command. Do not conclude the commands with a terminating character such as enter. - Page 10 C1 command. However, this modem does not support the C0 command. The C0 command instructs some modems not to send carrier (i.e., it puts them in receive-only mode).
- Page 11 _ ERROR if <value> 0—1. O<value>—Return to On-Line Data Mode Use this command to exit on-line command mode and re-enter on-line data mode. If the modem is not in on-line command mode when this command is received the modem generates an eRRoR result code.
- Page 12 P - Select Pulse Dialing Use this command to configure the modem for pulse dialing. All subsequent D<dial_string> commands use pulse dialing until either the T command or a tone dial modifier is received by the modem. Tone dialing is the default setting.
- Page 13 TROUBLESHOOTING Just in case you ever have to use this...
-
Page 14: Troubleshooting
Modem cannot dial and “NO DIALTONE” message appears on the monitor • Check the phone cord connection. Make sure that the jack on the modem labeled Line is connected to an analog phone wall jack. • The modem cannot recognize the dial tone. This is typical in some corporate PBXs. Use the ATX1 command in your setup string to enable Blind dial. - Page 15 Appendix i thought i had that removed...
-
Page 16: Appendix A: Cable Connections
If it is a new device, the operating system auto-detects it and asks for the driver disk. If the device has already been installed, the computer activates it and starts talking to it. USB devices can be connected and disconnected at any time. “A” Connection NetComm Roadster series 56K UsB modem RJ-11 Connector Normal assignment... -
Page 17: Appendix B: Registering Your Netcomm Product
�m�5�6� 5�6� www.netcomm.com.au NetComm Roadster Series 56K USB Modem NetComm Roadster series 56K UsB modem NetComm Roadster series 56K UsB modem NetComm Roadster series 56K UsB modem NetComm Roadster series 56K UsB modem... -
Page 18: Product Warranty
Your product has been repaired or modified or attempted to be repaired or modified, other than by a qualified person at a service centre authorised by NetComm; and, the serial number has been defaced or altered in any way or if the serial number plate has been removed. NetComm Roadster series 56K UsB modem transmitter. �m�5�6�... - Page 19 NetComm within 3� days of the original purchase by registering on-line via the NetComm web site at www.netcomm.com.au �m�5�6� 5�6� www.netcomm.com.au NetComm Roadster Series 56K USB Modem NetComm Roadster series 56K UsB modem NetComm Roadster series 56K UsB modem NetComm Roadster series 56K UsB modem NetComm Roadster series 56K UsB modem...
- Page 20 NETCOMM LIMITED Head Office PO Box 1200, Lane Cove NSW 2066 Australia P: � 9 ��� F: � 9 �1� E: int.sales@netcomm.com.au W: www.netcommlimited.com. Product Warranty NetComm products have a standard 12 months warranty from date of purchase. However some products have an extended warranty option, via registering your product online at the NetComm website www.netcommlimited.com.
Need help?
Do you have a question about the ROADSTER 56K and is the answer not in the manual?
Questions and answers