Basic Photography and Playback: Auto Mode
Step 1 Turn the Camera On and Select A (Auto) Mode
This section describes how to take pictures in A (auto) mode, an automatic,
"point-and-shoot" mode recommended for first-time users of digital cameras.
1
Press the power switch to turn on the camera.
The power-on lamp (green) will light for a moment and
the monitor will turn on. The lens will also extend.
Proceed to step 4 when A is displayed.
2
Press the e button.
3
Use the rotary multi selector to choose A and
press the k button.
The camera enters A (auto) mode.
4
Check the battery level and number of
exposures remaining in the monitor.
Battery level
Monitor
NO INDICATOR
B
N
Battery
exhausted.
Number of Exposures Remaining
The number of pictures that can be stored depends on the capacity of the internal
memory or memory card and image mode setting (A 84).
22
Description
Battery fully charged.
Battery low; prepare to charge or
replace the battery.
Cannot shoot. Recharge or
replace with a fully charged
battery.
Shooting
Battery level indicator
16 16 16
Number of exposures
remaining
Need help?
Do you have a question about the COOLPIX S610 and is the answer not in the manual?
Questions and answers