Today Screen - HP iPAQ HW 6955 Instruction Manual

399310-xx1.book Page 14 Friday, December 16, 2005 3:52 PM
Performing a Soft Reset
A soft reset stops all running applications, but does not erase any programs or
saved data.
NOTE Be sure to close all running applications before performing a soft reset.
To perform a soft reset:
1. Locate the recessed Reset button on the bottom of your HP iPAQ.
2. Use the stylus to lightly press the Reset button.
The HP iPAQ restarts and displays the Today screen.
Performing a Clean Reset
A clean reset clears all user-installed settings, programs, and data, and restores
your HP iPAQ to factory settings.
To perform a clean reset and return your HP iPAQ to factory settings:
1. Press and hold the Answer/Send, Power, and End Call buttons.
2. While holding these buttons, use the stylus to lightly press the Reset button
on the bottom of the HP iPAQ until the device restarts.
3. When the HP iPAQ restarts, release all of the buttons, and then remove the
stylus from the Reset button.
The HP iPAQ restarts and powers on.

Today Screen

The Today screen shows appointments, active tasks, and information about e-mail
messages. Along the top of the Today screen are the connectivity indicators,
Volume icon, and the clock.
Tap a section of the Today screen to open the program that is associated with
that section.
Access the Today screen by tapping Start > Today.
To customize the Today screen:
1. Tap Start > Settings > Today.
2. On the Appearance tab, select the desired theme for the background of
the Today screen.
3. On the Items tab, select the items you want to appear on the Today
screen.
14