Uso De La Máquina - MITACA i5M Instructions For Use Manual

Uso de la máquina
Llenar el depósito
•Extraiga el depósito (8) girándolo
externamente y levantándolo hacia arriba.
(Fig.1)
•Llene el depósito con agua hasta un
máximo de 2,5 litros. (Fig.2)
•Vuelva a colocar el depósito
inclinándolo ligeramente y apoyándolo
en la válvula del agua. Pulse la parte
superior en la máquina hasta sentir un clic.
A fin de evitar pérdidas de agua, controle
que el depósito esté fijado. (Fig.3)
8
Fig. 2
NOTA:
Cuando el piloto de fin del agua (A) parpadea lentamente, el depósito está vacío. Todas
las salidas en proceso se interrumpen. Quite y llene el depósito (8) con agua para reanudar
automáticamente el funcionamiento de la máquina.
8
Fig. 1
8
Fig. 3
72
Starting up/heating
• Use only specific capsules for the machine model
• Connect the machine by inserting the plug in the power
socket.
• Switch on the machine with the main switch (2).(Fig.4)
• The control buttons will start to blink slowly; once they
reach the temperature, the buttons will light up with a fixed
light, indicating that the machine is ready for use (Fig.4).
Rinsing the machine/inner circuits
The machine should be rinsed both at its very first use and
when it has been inoperative for a long spell of time. By
performing this quick procedure, you will ensure that all
inner circuits are rinsed.
• Close the small cup support (10) and place a large cup
on the grid (5)
(Fig. 5)
• Press the rinse button (D) (Fig. 6) and wait until dispensing
is finished. In this way the machine is rinsed.
N.B.
The control panel of the machines has touch buttons, it is
sufficient to press lightly on the illuminated signal.
To prepare tea or long espresso, close the small cup support
(10).
To prepare espresso coffee correctly, lower the small cup
support (10).
(Fig. 7).
10
Fig.7
2
Fig. 4
10
Fig.5
D
Fig.6
25
5