Contents Getting Started Wi-Fi Camera Overview Installation Mounting Insteon app for iPhone, iPad and iPod touch Configure a Camera for Wired Ethernet Configure a Camera for Wi-Fi Add an Already Configured Camera Add a Remote Camera Advanced Camera Configuration Insteon app for Android...
Wi-Fi Camera Installation Outlet Connections Camera Connections Connect the power adapter to an outlet and Connect the antenna, ethernet cable and DC connect the ethernet cable to your router. power connector to your camera.
Wi-Fi Camera Mounting Mounting Bracket Mount the optional bracket using screws and wall anchors. You can position the camera right-side up or upside down. Different wall materials require different screws and anchors. Use the appropriate type for your mounting surface. Drywall screws and anchors have been provided.
Insteon app for iPhone, iPad and iPod touch Insteon app for iPhone, iPad and iPod Touch Use the Insteon app to configure and control your Insteon Wi-Fi Camera. Use the Insteon app to configure and control your Insteon Wi-Fi Camera.
Configure a Camera for Wired Ethernet iPhone, iPad and iPod touch Launch the Insteon App. Tap the drawer icon or swipe from Tap Add a Device. the right edge of the display to open the drawer. Tap Camera. If you have not already done so,...
Page 9
Configure a Camera for Wired Ethernet iPhone, iPad and iPod touch The maximum password length is 12 characters The password must contain letters and numbers only; no special characters (!@#$%^&*, etc.) are permitted The password cannot contain spaces If the Next button is disabled, your password does not meet the password...
Page 10
Configure a Camera for Wired Ethernet iPhone, iPad and iPod touch Scroll down and tap Port. Change the port from 80 to 25106. Return to Settings by dismissing Edit Camera and Add Device. If you are setting up more than one camera, increase the port number Tap House.
Page 11
Configure a Camera for Wired Ethernet iPhone, iPad and iPod touch Write down the Gateway IP address and Subnet Mask. You should now have the following information: • Camera IP Address • Camera Port • Gateway IP Address • Subnet Mask...
Page 12
Visit insteon.com/remoteaccess instructions on configuring remote access. You’re done setting up your If the fields are empty, enter Insteon Wi-Fi Camera. the information gathered throughout this document. Use Gateway IP Address for both Gateway and DNS Server addresses.
Configure a Camera for Wi-Fi iPhone, iPad and iPod touch Launch the Insteon App Tap the drawer icon or swipe from Tap Add a Device the right edge of the display to open the drawer Tap Camera If you have not already done so,...
Page 14
Configure a Camera for Wi-Fi iPhone, iPad and iPod touch Give your camera a user name and Tap Use Wi-Fi and select your network Enter your Wi-Fi network password. This information is used from the list. If you don’t see your password and tap Next to secure your camera.
Page 15
Configure a Camera for Wi-Fi iPhone, iPad and iPod touch Scroll down and tap Port. Change the port from 80 to 25106. Return to Settings by dismissing Edit Camera and Add Device. If you are setting up more than one camera, increase the port number Tap House.
Page 16
Configure a Camera for Wi-Fi iPhone, iPad and iPod touch Write down the Gateway IP address and Subnet Mask. You should now have the following information: • Camera IP Address • Camera Port • Gateway IP Address • Subnet Mask...
Page 17
Visit insteon.com/remoteaccess instructions on configuring remote access. You’re done setting up your If the fields are empty, enter Insteon Wi-Fi Camera. the information gathered throughout this document. Use Gateway IP Address for both Gateway and DNS Server addresses.
Add an Already Configured Camera iPhone, iPad and iPod touch Add an already configured camera if you have already setup an Insteon Wi-Fi Camera using its web browser interface or would like to re-add a camera that was previously configured using the Insteon app.
Page 19
Add an Already Configured Camera iPhone, iPad and iPod touch Tap Camera Tap Next. Select that camera that you would like to add from the list of cameras...
Page 20
IP Address displayed at the bottom of the screen and tap Next. You’re done setting up your If you have not already done Insteon Wi-Fi Camera. so, you will need to configure manual remote access to see your camera when you are away from home.
Add a remote camera if your camera has been previously setup and is not located on your local network. Launch the Insteon App Tap the drawer icon or swipe from Tap Add a Device the right edge of the display to open...
Page 22
Enter your camera’s IP address or URL, Name your camera, select port, user name and password. When an icon and add it to a room. ready, tap Done. When finished, tap Done. You’re done setting up your Insteon Wi-Fi Camera.
DHCP, IP address and port. Launch the Insteon App Tap the drawer icon or swipe from Tap Add a Device the right edge of the display to open...
Page 24
Advanced Camera Configuration iPhone, iPad and iPod touch Tap Camera If you have not already done so, Select that camera that you connect your camera to power and your would like to configure from the router using the supplied ethernet cable. list of cameras It can take up to two minutes for your camera to complete its startup process.
Page 25
When remote access to see your camera finished, tap Done. when you are away from home. Follow these steps to Configure Manual Remote Access. You’re done setting up your Insteon Wi-Fi Camera.
Insteon app for Android Insteon app for Android Use the Insteon app to configure and control your Insteon Wi-Fi Camera. Use the Insteon app to configure and control your Insteon Wi-Fi Camera. The Insteon app requires Insteon Hub (2242-222) or (2245-222).
Configure a Camera for Wired Ethernet Android Launch the Insteon App Navigate to Settings by Tap Devices tapping Edit Settings from the Settings button Tap the Add button Tap Camera Tap Play to watch the setup video or tap Skip Video to...
Page 28
Configure a Camera for Wired Ethernet Android The maximum password length is 12 characters The password must contain letters and numbers only; no special characters (!@#$%^&*, etc.) are permitted The password cannot contain spaces If the Next button is disabled, your password does not meet the password restrictions.
Page 29
Configure a Camera for Wired Ethernet Android Scroll down and write down the Return to Settings by tapping Edit Local IP Address and IP Port. Settings from the Settings button. When ready, tap Done. Tap House Write down the Gateway IP address and Subnet Mask.
Page 30
Visit insteon.com/remoteaccess instructions on configuring remote access. You’re done setting up your If the fields are empty, enter Insteon Wi-Fi Camera. the information gathered throughout this document. Use Gateway IP Address for both Gateway and DNS Server addresses.
Configure a Camera for Wi-Fi Android Launch the Insteon App Navigate to Settings by Tap Devices tapping Edit Settings from the Settings button Tap the Add button Tap Camera Tap Play to watch the setup video or tap Skip Video to...
Page 32
Configure a Camera for Wi-Fi Android The maximum password length is 12 characters The password must contain letters and numbers only; no special characters (!@#$%^&*, etc.) are permitted The password cannot contain spaces If the Next button is disabled, your password does not meet the password restrictions.
Page 33
Configure a Camera for Wi-Fi Android When prompted, disconnect the Wait while your camera’s Name your camera, select an ethernet cable from your camera settings are updated icon and add it to a room. and tap Next Scroll down and write down the Return to Settings by tapping Tap House Edit Settings from the...
Page 34
Configure a Camera for Wi-Fi Android Write down the Gateway IP address and Subnet Mask.
Page 35
Visit insteon.com/remoteaccess instructions on configuring remote access. You’re done setting up your If the fields are empty, enter Insteon Wi-Fi Camera. the information gathered throughout this document. Use Gateway IP Address for both Gateway and DNS Server addresses.
Setup without Insteon Hub Setup without Insteon App If you don’t have Insteon Hub and the Insteon app, you can setup your If you don’t have Insteon Hub and the Insteon app, you can setup your Wi-Fi Camera from your Mac or PC.
Double-click the camera that Camera Setup Assistant from you would like to configure. your Mac or PC. insteon.com/csa Enter the camera’s default account Click the button that corresponds to credentials. When ready, click Log In. your computer’s internet browser. This guide assumes you are using Firefox, Default User Name: “admin”...
Page 38
Configure a Camera for Wired Ethernet Mac or PC Click Device Management Click Alias Settings Give your camera a name. When Click Users Settings ready, click Submit.
Page 39
Configure a Camera for Wired Ethernet Mac or PC The maximum password length is 12 characters The password must contain letters and numbers only; no special characters (!@#$%^&*, etc.) are permitted The password cannot contain spaces If the Next button is disabled, your password does not meet the password restrictions.
Page 40
Mac or PC Change the port from 80 to 25106. Close your browser and return to the Insteon Camera Setup Assistant. If you are setting up more than one camera, increase the port number for Write down the IP address displayed to each successive camera to ensure that the right of the camera name.
Page 41
Configure a Camera for Wired Ethernet Mac or PC Enter your camera password and click OK. It may take up to two minutes for your camera to restart. Visit insteon.com/remoteaccess instructions on configuring remote access. You’re done setting up your Insteon Wi-Fi Camera.
Double-click the camera that Camera Setup Assistant from you would like to configure. your Mac or PC. insteon.com/csa Enter the camera’s default account Click the button that corresponds to credentials. When ready, click Log In. your computer’s internet browser. This guide assumes you are using Firefox, Default User Name: “admin”...
Page 43
Configure a Camera for Wi-Fi Mac or PC Click Device Management Click Alias Settings Give your camera a name. When Click Users Settings ready, click Submit.
Page 44
Configure a Camera for Wi-Fi Mac or PC The maximum password length is 12 characters The password must contain letters and numbers only; no special characters (!@#$%^&*, etc.) are permitted The password cannot contain spaces If the Next button is disabled, your password does not meet the password restrictions.
Page 45
Configure a Camera for Wi-Fi Mac or PC Change the port from 80 to 25106. Close your browser and return to the Insteon Camera Setup Assistant. If you are setting up more than one camera, increase the port number for...
Page 46
Submit. ensure that you’ve connected the antenna to your camera. After clicking Submit, disconnect the Return to the Insteon Camera Setup ethernet cable from your camera and Assistant. Your camera should be close your browser. It make take up to automatically detected.
Page 47
Gateway and DNS Server should auto-populate. Enter your camera password and click OK. It may take up to two minutes for your camera to restart. Visit insteon.com/remoteaccess instructions on configuring remote access. You’re done setting up your Insteon Wi-Fi Camera.
Web Browser Interface Web Browser Interface Use the web browser interface to configure advanced settings on Use the web browser interface to configure advanced settings on your camera. your camera.
Web Interface Many camera settings can only be modified using the camera’s web browser interface. Information on configuring supported settings can be found on insteon.com/support.
Page 50
Camera Setup Assistant Use the Camera Setup Assistant to find your Insteon Wi-Fi Camera on your network to administer changes or update firmware using the camera’s web browser interface. Camera Setup Assistant for OS X Camera Setup Assistant for Windows Requires Mac OS X 10.7 or higher...
Factory Reset Factory Reset Restore all settings by performing a factory reset. Configured users, Restore all settings by performing a factory reset. Configured users, passwords, network settings and more are all erased and restored to passwords, network settings and more are all erased and restored to factory defaults.
Factory Reset Ensure your camera is connected to power and then press and hold the reset button for 60 seconds. Indoor Camera Use a straightened paper clip to depress the recessed reset button located on the bottom of the camera for 60 seconds.
Appendix Appendix Everything else you might need to know about your Insteon product. Everything else you might need to know about your Insteon product.
Specifications General Available Colors White (Indoor) Black (Indoor) Brand: Insteon Manufacturer Product No.: 75790WH White (Indoor) 75790 Black (Indoor) UPC: 813922015997 White (Indoor) 813922015898 Black (Indoor) Warranty: 90 days, limited Mechanical Dimensions 5.1” H x 4.1” W x 5.7” D...
Page 56
Microsoft Windows 7 or later Mac OS X 10.7 or later Apple iOS 7 or later Android 2.2 or later Browser Compatibility A list of supported browsers can be found on insteon.com/support Network Ethernet Support One 10/100 RJ45 port Wi-Fi Support iEEE 802.11 b/g...
Certifications and Warnings This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Separate collection and treatment of WEEE will thus decrease CO2 emissions as well. For the above reasons, Insteon expects end-users to dispose of the material in an environmentally friendly way through separate collection and treatment. Electrical and Electronic Equipment is labeled with the following ‘crossed out wheeled bin’...
Need help?
Do you have a question about the 75790 and is the answer not in the manual?
Questions and answers