Initial Settings - JVC PD-42D30ES Instructions Manual

Initial settings

When the TV is first turned on, it goes into the initial setting
mode, and you will see the JVC logo. Follow the
instructions on the screen display to make the initial
settings.
1 Press the # # # button on the remote control #
The receiver power lamp changes from red to green.
After a short interval the TV power lamp lights green
and the JVC logo is displayed.
• Check that the AC plugs on the power cords from the
TV and receiver are connected to AC outlets.
Display front
<PD-42D30ES>
Remote control sensor
Power lamp
Receiver front
• If the power lamp stays red and does not change to
green:
Your TV is in the standby mode. Press the #
(Standby) button again to turn your TV on.
• If the JVC logo does not appear this is because your
TV has already been turned on for the first time:
use the "LANGUAGE" and "AUTO PROGRAM"
functions to make the initial settings. For details, see
"INSTALL" on page 35.
2 Press the a button
The LANGUAGE menu appears.
LANGUAGE
BACK
TV OK
D0002(E)-EN
14
0
Yellow button
AV
Blue button
3D PIP
MENU
P
TV OK
P
<PD-35D30ES>
Power lamp Remote control
sensor
A button
Power lamp
3 Press the 5 5 and 6 6 buttons to choose
5 5 6 6
ENGLISH. Then press the a
The on-screen display will then be in English.
The COUNTRY menu appears as a sub-menu of the
AUTO PROGRAM function.
There are two COUNTRY menus. Pressing the yellow
button changes the COUNTRY menu as follows:
BACK BACK
START
TV OK TV OK
MORE
D0003-EN
4 Press the 5 5 5 and 6 5 6 buttons to choose the 6 6
country where you are
• For uses in the UK:
To receive SKY 1 you need a satellite tuner. You
must have the satellite tuner set to SKY 1 before
starting the AUTO PROGRAM function which
follows.
5 Press the blue button to start the AUTO
PROGRAM function
The AUTO PROGRAM menu appears and received TV
channels are automatically stored in the programme
numbers (PR).
• To cancel the AUTO PROGRAM function:
Press the b button.
AUTO PROGRAM EDIT
PR
CH 10 AV
01
02
20%
03
04
05
BACK
06
07
TV OK
08
09
BACK
TV OK
MOVE
D0004-EN
After the TV channels have been registered in
the programme numbers (PR), the EDIT menu
appears
• If you want to, you can now edit the programme
numbers (PR) using the EDIT/MANUAL function.
For details, see "EDIT/MANUAL" on page 36.
• If you do not want to edit programme numbers (PR),
go to the next step.
If "ACI START/ACI SKIP" appears in the AUTO
PROGRAM menu:
You can use the ACI (Automatic Channel Installation)
function to decode the ACI data and complete the
registration of all the TV channels quickly. For details of
the ACI function and how to use it, see "Using the ACI
function" on page 39.
If you don't want to use the ACI function, press the 6
buttons to choose ACI SKIP and then press a.
6 Press the a button to display the T-V LINK
menu
T-V LINK
DOWNLOAD TV VCR
BACK
TV OK
EXIT
D0005-EN
a button
a a
START
MORE
ID CH / CC
BBC1 CH 21
CH 22
CH 23
CH 24
CH 25
CH 26
CC 01
CC 02
CC 03
ID
INSERT
DELETE
MANUAL