2009 hp business notebook pc f10 setup overview (11 pages)
Summary of Contents for HP ProBook 4520s
Page 1
HP ProBook 4520s Notebook PC HP ProBook 4720s Notebook PC Maintenance and Service Guide Downloaded from LpManual.com Manuals...
Page 2
Corporation. SD Logo is a trademark of its proprietor. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty.
Page 3
MSG revision history Revision Publication date Description July 2010 ● Updated commodities in the following location: Product description on page ● Updated AC adapter spare part numbers in the following locations: Miscellaneous parts on page Sequential part number listing on page 38 ●...
Page 4
MSG revision history Downloaded from LpManual.com Manuals...
Page 5
Safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow.
Page 6
Safety warning notice Downloaded from LpManual.com Manuals...
Description HP ProBook HP ProBook HP ProBook 4520s UMA 4520s 4720s discrete discrete Product Name HP ProBook 4520s Notebook PC √ √ HP ProBook 4720s Notebook PC √ Processors Intel® Core™ processors: i7-640M, 2.80-GHz (Turbo up to 3.46 ● √...
Page 13
Category Description HP ProBook HP ProBook HP ProBook 4520s UMA 4520s 4720s discrete discrete 17.3-in HD LED backlight panel: √ ● 1600×900 AntiGlare ● 1600×900 AntiGlare for webcam and WWAN ● 1600×900 BrightView for webcam ● 1600×900 BrightView for webcam and...
Page 14
320-GB, 7200-rpm ● 250-GB, 7200-rpm Supports 9.5-mm, 6.35-cm (2.50-in) hard drives 750-GB, 5400-rpm ● √ √ √ HP 3D DriveGuard (not available on Linux) √ √ √ Optical drives Fixed, no modular requirements √ √ √ SATA 12.7-mm tray load √...
Page 15
√ √ Bluetooth 2.1 √ √ √ Integrated WWAN options by way of HP Mobile Broadband Module: Supports only HP certified WWAN options √ √ WWAN module UNDP Gobi2 including GPS √ with 2 antennas (not available with Linux or...
Page 16
Category Description HP ProBook HP ProBook HP ProBook 4520s UMA 4520s 4720s discrete discrete RJ-11 (modem) √ √ √ RJ-45 (Ethernet, includes link and activity √ √ √ lights) USB 2.0 (3) √ √ √ Combination eSATA/USB 2.0 (1) √...
Page 17
Category Description HP ProBook HP ProBook HP ProBook 4520s UMA 4520s 4720s discrete discrete Windows 7 Professional with Office 2007 √ √ √ Personal (Japan only) Windows 7 Professional with Office 2007 √ √ √ Personal with PowerPoint (Japan only) Windows 7 Professional with Office 2007 √...
Page 18
Category Description HP ProBook HP ProBook HP ProBook 4520s UMA 4520s 4720s discrete discrete Preinstalled: Windows 7 Professional 32 (Japan only) √ √ √ Windows 7 Home Premium 32 (Japan only) √ √ √ Windows Vista Home Basic 32 with MS √...
Page 19
Category Description HP ProBook HP ProBook HP ProBook 4520s UMA 4520s 4720s discrete discrete Serviceability End-user replaceable parts: AC adapter √ √ √ Battery (system) √ √ √ Hard drive √ √ √ Memory module √ √ √ Optical drive √...
External component identification NOTE: Depending on the operating system installed on your comouter, some components may function differently than described. Some functionality may not be supported by the operating system installed on your computer. Top Components TouchPad Component Description TouchPad off indicator light To turn the TouchPad zone on and off, quickly double-tap the TouchPad off indicator.
Amber: The TouchPad is off. ● Off: The TouchPad is on. Caps lock light On: Caps lock is on. HP QuickLook light Blinking: QuickLook is being opened or closed. HP QuickWeb light Blinking: QuickWeb browser is being opened or closed. ●...
Buttons, switches, and speakers (select models only) NOTE: Your computer may look slightly different from the illustration in this section. Component Description Speakers (2) Produce sound. Internal display switch Turns off the display if the display is closed while the power is on. Power button ●...
Keys Component Description Displays system information when pressed in combination with the key. Executes frequently used system functions when pressed in combination with a function key, the num lk key, or the key. Windows logo key Displays the Windows Start menu. Windows applications key Displays a shortcut menu for items beneath the pointer.
Description ● Drive light Blinking white: The hard drive or optical drive is being accessed. ● Amber: HP 3D DriveGuard has temporarily parked the hard drive. Media Card Reader Supports the following optional digital card formats: ● Memory Stick ●...
Component Description HDMI port Connects an optional HDMI device. Combo eSATA/USB port Connects an optional USB device or high-performance eSATA components such as an eSATA external hard drive. USB port Connects optional USB device. ExpressCard slot Supports optional ExpressCards. Bottom components Component Description Battery release latches (2)
Display NOTE: Your computer may look slightly different from the illustration in this section. Component Description Internal display switch Turns off the display if the display is closed while the power is on. Internal microphone Records sound. Webcam light (select models only) On: The webcam is in use.
Wireless antennas The antennas send and receive signals from one or more wireless devices. These antennas are not visible from the outside of the computer. Component Description WWAN antennas (2)* (select models only) Send and receive wireless signals to communicate with wireless wide-area networks (WWAN).
Additional hardware components Component Description Power cord* Connects an AC adapter to an AC outlet. Battery* Powers the computer when the computer is not plugged into external power. AC adapter Converts AC power to DC power. *Batteries and power cords vary in appearance by country or region. Additional hardware components Downloaded from LpManual.com Manuals...
Illustrated parts catalog Service tag When ordering parts or requesting information, provide the computer serial number and model description provided on the service tag. (1) Product name: This is the product name affixed to the front of the computer. (2) Serial number (s/n): This is an alphanumeric identifier that is unique to each product. (3) Part number/product number (p/n): This number provides specific information about the product's hardware components.
Computer major components Item Description Display assembly (includes microphone, 2 WLAN antenna transceivers and cables and, on select computer models, 2 WWAN antenna transceivers and cables) For use only with computers with 17.3-in displays Computer major components Downloaded from LpManual.com Manuals...
Page 32
Item Description ● 17.3-in HD BrightView display assembly for use in computers equipped with webcam 598708-001 and WWAN (1600×900 resolution) ● 17.3-in HD BrightView display assembly (1600×900 resolution) 606167-001 ● 17.3-in HD AntiGlare display assembly for use in computers equipped with webcam 606166-001 and WWAN (1600×900 resolution) ●...
Page 33
Item Description 15.6-in HD AntiGlare display assembly for use in computers equipped with a webcam 626117-001 ● and WWAN (1366×768 resolution) 15.6-in HD AntiGlare display assembly for use in computers equipped with a webcam 626116-001 ● (1366×768 resolution) 15.6-in HD AntiGlare display assembly (1366×768 resolution) 626115-001 ●...
Page 34
(11) Bluetooth module 537921-001 HP Integrated module with Bluetooth 2.1 wireless technology for use in Andorra, Argentina, Australia, Austria, Bangladesh, Belarus, Belgium, Bermuda, Brazil, Brunei, Bulgaria, Canada, Cayman Islands, Chile, China, Croatia, Cyprus, Czech Republic, Denmark, Egypt, El Salvador, Estonia, Finland, France, Germany, Greece, French Guiana,...
Page 35
Item Description Intel Centrino Advanced-N6200 802.11 a/b/g/n 2x2 for use in Andorra, Antigua 572509-001 & Barbuda, Argentina, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Barbados, Belgium, Bolivia, Bosnia & Herzegovina, Brazil, Brunei, Bulgaria, Canada, Chile, China, Colombia, Costa Rica, Croatia, Cyprus, Czech Republic, Denmark, Dominican Republic, Ecuador, Egypt, El Salvador, Estonia, Finland, France, Georgia, Germany, Ghana, Greece, Guam, Guatemala, Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Indonesia, Ireland, Israel, Italy, Ivory Coast, Jamaica.
Page 36
Item Description ● For use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, 504593-004 Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cameroon, Cape Verde, the Central African Republic, Chad, Chile, the People's Republic of China, Colombia, Comoros, the Congo, Costa Rica, Croatia, Cyprus, the Czech Republic, Denmark, Djibouti, Dominica, the Dominican...
Page 37
Item Description For use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, 518434-002 ● Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cameroon, Cape Verde, the Central African Republic, Chad, Chile, the People's Republic of China, Colombia, Comoros, the Congo, Costa Rica, Croatia, Cyprus, the Czech Republic, Denmark, Djibouti, Dominica, the Dominican...
Page 38
Item Description 600370-001 Broadcom 4313 802.11b/g/n 1x1 WiFi and 2070 Bluetooth 2.1+EDR Combo Adapter for use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cambodia, Cameroon, Canada, Cape Verde, the Cayman Islands, Central African Republic, Chad, Chile, the People's Republic of China, Colombia, Comoros, Congo, Costa...
Page 39
625831-001 Intel Celeron processor: P4500, 1.86-GHz, 2-MB cache 611699-001 616073-001 (19) RTC battery (20) HP un2420 Broadband Module 531993-001 (21) Optical drive extender for use only in computers with 17.3-in displays 598687-001 (22) Modem module NOTE: The modem module spare part kit does not include a modem module cable. The modem module cable is included in the Base Cable Kit , spare part numbers 599807-001.
Page 40
Item Description For use in computers with 15.6-in displays 598680-001 (26) Hard drive (includes hard drive bracket) 750-GB, 5400-rpm 598699-001 640-GB, 5400-rpm 617667-001 500-GB, 7200-rpm 598698-001 320-GB, 7200-rpm 598697-001 250-GB, 7200-rpm 598696-001 (27) Optical drive (includes bezel) DVD-ROM Drive 598693-001 DVD±RW Double-Layer Drive with LightScribe 598694-001 Blu-ray Disc ROM Drive with SuperMulti DVD±R/RW Double-Layer...
Display assembly components Item Description Spare part number Display bezel For use in computers with 17.3-in displays without webcam 600924-001 For use in computers with 15.6-in displays without webcam 598690-001 For use in computers with 17.3-in displays with webcam 600927-001 For use in computers with 15.6-in displays with webcam 600926-001 Webcam module...
Item Description Spare part number Display Hinge Kit For use in computers with 17.3-in displays 602677-001 For use in computers with 15.6-in displays 598679-001 Microphone cable LCD Cable Kit with webcam cable For use in computers with 17.3-in displays 602999-001 For use in computers with 15.6-in displays 600925-001 WLAN and WWAN antenna transceivers and cables...
Cable Kits Item Description Spare part number Base Cable Kit For use in computers with 17.3-in displays, includes DC-in cable (1), USB cable (2), 603188-001 Bluetooth cable (3), and RJ-11 cable (4). For use in computers with 15.6-in displays, includes DC-in cable (1), USB cable (2), 599807-001 Bluetooth cable (3), and RJ-11 cable (4).
Page 44
Item Description Spare part number Misc LCD Cable Kit For use in computers with 15.6-in displays, includes microphone cable (1), WWAN 599806-001 transceiver with cable (2), and WLAN transceiver with cable (3) For use in computers with 17.3-in displays, includes items (1), (2), and (3) 606974-001 Display cable, HD+ 629030-001...
Item Description Spare part number LCD Cable Kit with webcam cable For use in computers with 17.3-in displays 602999-001 For use in computers with 15.6-in displays 600925-001 LCD Cable without webcam cable For use in computers with 17.3-in displays 606973-001 For use in computers with 15.6-in displays 606972-001 Mass storage devices...
Item Description Spare part number DVD-ROM Drive 598693-001 Blu-ray Disc ROM Drive with SuperMulti DVD±R/RW Double-Layer 598695-001 Miscellaneous parts Description Spare part number AC adapters 65-W Smart AC adapter with power factor correction (PFC), RC/V EM 3W for use in the Asia- 609948-001 or Pacific region 613161-001...
Sequential part number listing Spare part Description number 490371-001 Power cord for use in the United States 490371-011 Power cord for use in Australia and New Zealand 490371-021 Power cord for use in Europe, the Middle East, and Africa 490371-031 Power cord for use in the United Kingdom 490371-061 Power cord for use in Italy...
Page 49
Sweden, Switzerland, Taiwan, Tajikistan, Tanzania, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine, the United Arab Emirates, the United Kingdom, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe 531993-001 HP un2420 Broadband Module 537921-001 Bluetooth module with Bluetooth 2.1 wireless technology 572509-001 Intel Centrino Advanced-N6200 802.11a/b/g/n 2x2 WLAN for use in Andorra, Antigua and Barbuda,...
Page 50
Spare part Description number 572520-001 Intel Wi-Fi Link 1000, 802.11b/g/n WLAN module for use in Andorra, Antigua and Barbuda, Argentina, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Barbados, Belgium, Bolivia, Bosnia and Herzegovina, Brazil, Brunei, Bulgaria, Canada, Cayman Islands, Chile, China, Colombia, Costa Rica, Croatia, Cyprus, the Czech Republic, Denmark, the Dominican Republic, Ecuador, Egypt, El Salvador, Estonia, Finland, France, French Guiana, Guadeloupe, Guam, Georgia, Germany, Ghana, Greece, Guatemala, Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Indonesia, Ireland, Israel, Italy, Ivory Coast, Jamaica, Japan, Jordan,...
Page 52
Spare part Description number 598691-061 Keyboard for use in Italy on computers with 15.6-in displays 598691-071 Keyboard for use in Spain on computers with 15.6-in displays 598691-081 Keyboard for use in Denmark on computers with 15.6-in displays 598691-091 Keyboard for use in Norway on computers with 15.6-in displays 598691-121 Keyboard for use in French Canada on computers with 15.6-in displays 598691-131...
Page 53
Spare part Description number 598692-071 Keyboard for use in Spain on computers with 17.3-in displays 598692-081 Keyboard for use in Denmark on computers with 17.3-in displays 598692-091 Keyboard for use in Norway on computers with 17.3-in displays 598692-121 Keyboard for use in French Canada on computers with 17.3-in displays 598692-131 Keyboard for use in Portugal on computers with 17.3-in displays 598692-141...
Page 54
Spare part Description number 598699-001 750-GB, 5400 rpm hard drive (includes hard drive bracket) 598702-001 15.6-in HD AntiGlare display assembly for use in computers with black trim 598703-001 15.6-in HD AntiGlare display assembly for use in computers with webcam and black trim 598704-001 15.6-in HD AntiGlare display assembly for use in computers with webcam, WWAN, and black trim 598705-001...
Page 55
Spare part Description number 600927-001 Display bezel for use in computers with 17.3-in displays with a webcam 600928-001 Display enclosure for use in computers with 15.6-in displays 600929-001 Display enclosure for use in computers with 17.3-in displays 602677-001 Hinge Kit for use in computers with 17.3-in displays 602992-001 Ralink RT3090BC4 802.11b/g/n 1x1 WiFi and Bluetooth 2.1+EDR Combo Adapter for use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria,...
Page 56
Spare part Description number 605169-001 System board with discrete graphics subsystem memory for use only in the People's Republic of China and Russia 605170-001 System board with UMA graphics subsystem memory and WWAN for use only in the People's Republic of China and Russia 605171-001 System board with discrete graphics, WWAN capability, and RTC battery for use only in the People's...
Page 57
Spare part Description number 626114-001 Switch cover with power button switch for use in computers with 15.6-in displays and champagne-colored trim 626115-001 15.6-in HD AntiGlare display assembly for use in computers with champagne-colored trim (1366×768 resolution) 626116-001 15.6-in HD AntiGlare display assembly for use in computers equipped with webcam and champagne-colored trim (1366×768 resolution) 626117-001 15.6-in HD AntiGlare display assembly for use in computers equipped with webcam, WWAN, and...
Removal and replacement procedures Preliminary replacement requirements Tools required You will need the following tools to complete the removal and replacement procedures: ● Flat-bladed screwdriver ● Magnetic screwdriver ● Phillips P0 and P1 screwdrivers ● Torx T8 screwdriver Service considerations The following sections include some of the considerations that you must keep in mind during disassembly and assembly procedures.
Cables and connectors CAUTION: When servicing the computer, be sure that cables are placed in their proper locations during the reassembly process. Improper cable placement can damage the computer. Cables must be handled with extreme care to avoid damage. Apply only the tension required to unseat or seat the cables during removal and insertion.
Grounding guidelines Electrostatic discharge damage Electronic components are sensitive to electrostatic discharge (ESD). Circuitry design and structure determine the degree of sensitivity. Networks built into many integrated circuits provide some protection, but in many cases, ESD contains enough power to alter device parameters or melt silicon junctions.
Packaging and transporting guidelines Follow these grounding guidelines when packaging and transporting equipment: ● To avoid hand contact, transport products in static-safe tubes, bags, or boxes. ● Protect ESD-sensitive parts and assemblies with conductive or approved containers or packaging. ● Keep ESD-sensitive parts in their containers until the parts arrive at static-free workstations.
Equipment guidelines Grounding equipment must include either a wrist strap or a foot strap at a grounded workstation. ● When seated, wear a wrist strap connected to a grounded system. Wrist straps are flexible straps with a minimum of one megohm ±10% resistance in the ground cords. To provide proper ground, wear a strap snugly against the skin at all times.
Component replacement procedures This section provides removal and replacement procedures. There are many screws, in many different sizes, that must be removed, replaced, or loosened when servicing the computer. Make special note of each screw size and location during removal and replacement.
Computer feet The computer feet are adhesive-backed rubber pads. The feet are included in the Rubber Kit, spare part number 598678-001. There are 4 rubber feet that attach to the base enclosure in the locations illustrated below. Chapter 4 Removal and replacement procedures Downloaded from LpManual.com Manuals...
Battery Description Spare part number 8-cell, 73-Wh, 2.55-Ah Li-on battery for use in computers with 17.3-in displays 593576-001 6-cell, 47-Wh, 2.2-Ah Li-on battery for use in computers with 15.6-in displays 593572-001 6-cell, 93-Wh, 2.8-Ah Li-on battery for use in computers with 15.6-in displays 593573-001 Before disassembling the computer, follow these steps: Shut down the computer.
Switch cover and keyboard Description Spare part number Switch cover with power button board For use in computers with 17.3-in displays 598675-001 For use in computers with 15.6-in displays and black or red trim 598674-001 For use in computers with 15.6-in displays and champagne-colored trim 626114-001 Keyboards for use in computers with 17.3-in displays 598692-xx1...
Page 67
To remove the switch cover, remove the following: (1) Two screw covers on the rear edge of the computer (2) Two PM2.5×2.5 screws (3) Three PM2.0×2.5 broadhead screws located in the battery bay Open the computer as far as possible. Slide the switch cover back (1), and then remove it from the computer (2).
Page 68
Remove the two Phillips PM2.5×5.0 screws that secure the keyboard to the computer. Slide the keyboard back toward the display (1), and then rotate it forward (2) until it rests upside- down on the palm rest. Release the zero insertion force (ZIF) connector (1) to which the keyboard cable is attached, and disconnect the keyboard cable (2) from the system board.
Page 69
Remove the keyboard (3). Reverse this procedure to install the switch cover and keyboard. Component replacement procedures Downloaded from LpManual.com Manuals...
Memory module NOTE: When adding a second memory module, be sure it is the same type and speed as the installed memory module. Description Spare part number 4-GB (PC3-10600, 1333-MHz, DDR3) 599092-001 2-GB (PC3-10600, 1333-MHz, DDR3) 598856-001 1-GB (PC3-10600, 1333-MHz, DDR3) 598859-001 Before removing the memory module, follow these steps: Shut down the computer.
Remove the memory module (2) by pulling the module away from the slot at an angle. NOTE: Memory modules are designed with a notch to prevent incorrect insertion into the memory module slot. Reverse this procedure to install a memory module. Optical drive NOTE: All optical drive spare part kits include an optical drive bezel.
Page 72
Remove the battery (see Battery on page 55). Remove the switch cover and keyboard (see Switch cover and keyboard on page 56). NOTE: It is not necessary to disconnect the keyboard cable from the system board to remove the optical drive. Remove the optical drive: Position the computer with the right side toward you.
Remove the optical drive bracket (2). Reverse this procedure to reassemble and install an optical drive. Power button board Description Spare part number Switch cover with power button board For use in computers with 17.3-in displays 598675-001 For use in computers with 15.6-in displays and black or red trim 598674-001 For use in computers with 15.6-in displays and champagne-colored trim 626114-001...
Page 74
Remove the power button board. Release the ZIF connector (1) and disconnect the ribbon cable (2) from the system board. Remove the screw (1) that secures the power button board to the base pan and the slide the board out of the retainer (2) to the left (3) to remove it. Reverse this procedure to install the power button board.
Speakers Description Spare part number For use in computers with 17.3-in displays 598686-001 For use in computers with 15.6-in displays 598685-001 Before removing the speakers, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
Page 76
Remove the cables from the routing channels and lift the speakers (3) from the computer. Remove the speakers from the 15.6-in computer: Remove the two PM2.5x6.0 screws (1) that secure the speakers to the top cover. Disconnect the speaker cable connector (2) from the system board. Chapter 4 Removal and replacement procedures Downloaded from LpManual.com Manuals...
Remove the cables from the routing channels and the speakers (3) from the computer. Reverse this procedure to install the speakers. Thermal shield NOTE: The spare part number for the thermal shield is 603700-001. Before removing the thermal shield, follow these steps: Shut down the computer.
Page 78
Remove the thermal shield on the 17.3-in computer: Position the computer right-side up with the front toward you. Remove the PM2.5×3.0 screw (1) from the thermal shield. Raise the thermal shield (2) and remove it (3) from the computer. Remove the thermal shield on the 15.6-in computer: Position the computer right-side up with the front toward you.
Page 79
Reverse this procedure to reassemble and install an optical drive. Component replacement procedures Downloaded from LpManual.com Manuals...
WLAN module Description Spare part number Intel Centrino Advanced-N6200 802.11 a/b/g/n 2x2 572509-001 For use in Andorra, Antigua & Barbuda, Argentina, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Barbados, Belgium, Bolivia, Bosnia & Herzegovina, Brazil, Brunei, Bulgaria, Canada, Chile, China, Colombia, Costa Rica, Croatia, Cyprus, Czech Republic, Denmark, Dominican Republic, Ecuador, Egypt, El Salvador, Estonia, Finland, France, Georgia, Germany, Ghana, Greece, Guam, Guatemala, Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Indonesia, Ireland, Israel, Italy, Ivory Coast, Jamaica.
Page 81
Description Spare part number For use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, 504593-004 Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cameroon, Cape Verde, the Central African Republic, Chad, Chile, the People's Republic of China, Colombia, Comoros, the Congo, Costa Rica, Croatia, Cyprus, the Czech Republic, Denmark, Djibouti, Dominica, the Dominican Republic, East Timor, Ecuador, Egypt, El Salvador, Equitorial Guinea, Eritrea, Estonia,...
Page 82
Description Spare part number For use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, 518434-002 Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cameroon, Cape Verde, the Central African Republic, Chad, Chile, the People's Republic of China, Colombia, Comoros, the Congo, Costa Rica, Croatia, Cyprus, the Czech Republic, Denmark, Djibouti, Dominica, the Dominican Republic, East Timor, Ecuador, Egypt, El Salvador, Equitorial Guinea, Eritrea, Estonia,...
Page 83
Description Spare part number For use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cambodia, Cameroon, Canada, Cape Verde, the Cayman Islands, Central African Republic, Chad, Chile, the People's Republic of China, Colombia, Comoros, Congo, Costa Rica, Croatia, Cyprus, Czech Republic, Denmark, Djibouti, Dominica, the Dominican Republic, East Timor, Ecuador, Egypt, El Salvador,...
Page 84
Before removing the WLAN module, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect all external devices connected to the computer. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
Page 85
Remove the WLAN module (3) by pulling the module away from the slot at an angle. NOTE: WLAN modules are designed with a notch (4) to prevent incorrect insertion. Reverse this procedure to install the WLAN module. Component replacement procedures Downloaded from LpManual.com Manuals...
NOTE: Only computers with UMA graphics include a WWAN module. NOTE: The spare part number for the HP un2420 Broadband Module is 531993-001. CAUTION: To prevent an unresponsive system, replace the wireless module only with a wireless module authorized for use in the computer by the governmental agency that regulates wireless devices in your country or region.
Page 87
Remove the WWAN module (3) by pulling the module away from the slot at an angle. NOTE: WWAN modules are designed with a notch (4) to prevent incorrect insertion. Reverse this procedure to install the WWAN module. Component replacement procedures Downloaded from LpManual.com Manuals...
Heat sink and fan NOTE: The heat sink spare part kit includes replacement thermal material. Description Spare part number Heat sink for use in computers with UMA graphics subsystems 598676-001 Heat sink for use in computers with discrete graphics subsystems 598677-001 Before removing the heat sink, follow these steps: Shut down the computer.
Page 89
Disconnect the fan cable from the system board (7), and then remove the heat sink (8). Component replacement procedures Downloaded from LpManual.com Manuals...
Page 90
Clean the thermal material from the surfaces of the heat sink components (1) and (3) and from the system board (2) and (4) when the heat sink is removed. Replacement thermal material is included with all heat sink, system board, and processor spare part kits. ●...
Page 91
Disconnect the fan cable from the system board (5), and remove the heat sink (6). Component replacement procedures Downloaded from LpManual.com Manuals...
Page 92
Clean the thermal material from the surfaces of the heat sink components (1) and the system board (2) each time the heat sink is removed. Replacement thermal material is included with all heat sink, system board, and processor spare part kits. Reverse this procedure to install the heat sink and fan.
Remove the processor: Position the computer right-side up with the front toward you. Use a flat-bladed screwdriver to turn the processor locking screw (1) one-half turn counterclockwise until you hear a click. Lift the processor (2) straight up and remove it. NOTE: When you install the processor, the gold triangle (3) on the processor must be aligned with the triangle (4) embossed on the processor socket.
Page 95
Description Spare part number Palm rest for 15.6-in displays with fingerprint reader with red trim (includes TouchPad) 604861-001 Palm rest for 15.6-in displays with fingerprint reader with champagne-colored trim (includes 626113-001 TouchPad) Before removing the palm rest, follow these steps: Shut down the computer.
Page 96
Release the ZIF connectors (1) and (3) to which the TouchPad and fingerprint cables are connected, and then disconnect the cables (2) and (4) from the system board. NOTE: Only select models are equipped with fingerprint readers. Remove the palm rest. Reverse this procedure to install the palm rest.
Hard drive NOTE: The hard drive spare part kit includes a hard drive bracket. Description Spare part number 750-GB, 5400-rpm hard drive 598699-001 640-GB, 5400-rpm hard drive 617667-001 500-GB, 7200-rpm hard drive 598698-001 320-GB, 7200-rpm hard drive 598697-001 250-GB, 7200-rpm hard drive 598696-001 Before removing the hard drive, follow these steps: Shut down the computer.
Page 98
Remove the hard drive (4) from the hard drive bay. If it is necessary to replace the hard drive bracket, remove the two Phillips PM3.0×4.0 hard drive bracket screws (1) from each side of the hard drive. Lift the bracket (2) straight up to remove it from the hard drive. Reverse this procedure to reassemble and install the hard drive.
Display assembly on computers with 17.3-in displays NOTE: The Miscellaneous LCD Cable Kit, spare part number 599806-001, includes 2 WLAN antenna transceivers and cables. Description Spare part number 17.3-in HD BrightView display assembly for use in computers equipped with webcam and WWAN 598708-001 (1600×900 resolution) 17.3-in HD BrightView display assembly (1600×900 resolution)
Page 100
Disconnect and remove the WLAN wireless antenna cables (4) from the tape, clips, and routing channels built into the top cover. Remove the display assembly: CAUTION: Support the display assembly when removing the following screws. Failure to support the display assembly can result in damage to the display assembly and other computer components. Remove the six Torx M2.5×6.0 screws (1) that secure the display assembly to the computer.
Page 101
Lift the display assembly (2) straight up. Component replacement procedures Downloaded from LpManual.com Manuals...
Page 102
If it is necessary to replace the display bezel, display enclosure, or display hinges, remove the two mylar screw covers (1) at the bottom corners of the display and the two Torx M2.0×6.0 screws (2) that secure the display bezel to the display assembly. Flex the bottom bezel (1) around the hinge areas on the inside of the display enclosure and work around the periphery of the bezel (2) and (3).
Page 103
When the bezel is free, lift it (4) from the display. If it is necessary to replace the webcam module, gently pull the webcam module away from the double-sided tape on the display enclosure (1) and disconnect the webcam cable from the module (2).The webcam module with cable can be ordered by using spare part number 598671-001.
Page 104
If it is necessary to replace the display hinges, remove the display panel by removing the two Torx M2.0×6.0 screws (1) that secure the panel to the top of the display enclosure, and then remove the four Torx M2.0×6.0 screws (2) located at the hinge arms. This will allow the panel to be lifted from the enclosure.
Page 105
Disconnect the display cable from the back of the display panel (3) and remove the webcam cable (4) from the raceway. The display cable is spared in the LCD cable kit, spare part number 599806-001. Reverse this procedure to reassemble and install the display assembly. Component replacement procedures Downloaded from LpManual.com Manuals...
Display assembly on computers with 15.6-in displays NOTE: For information about removing the display from 17.3-in models, see Display assembly on computers with 17.3-in displays on page NOTE: The Miscellaneous LCD Cable Kit, spare part number 599806-001, includes 2 WLAN antenna transceivers and cables.
Description Spare part number 15.6-in HD AntiGlare display assembly for use in computers equipped with webcam 626116-001 ● (1366×768 resolution) 15.6-in HD AntiGlare display assembly (1366×768 resolution) 626115-001 ● Before removing the 15.6-in display assembly, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
Remove the display assembly: Position the computer right-side up with the front toward you. Open the computer as far as possible. CAUTION: Support the display assembly when removing the retaining screws. Failure to support the display assembly can result in damage to the display assembly and other computer components.
Page 109
Lift the display assembly up and off the computer (2). If it is necessary to replace the display bezel, display enclosure, or display hinges, remove the two mylar screw covers (1) and the 2 Torx M2.5×6.0 screws (2) that secure the display bezel to the display assembly.
Page 110
Lift the bezel (4) until it disengages completely. If it is necessary to replace the webcam module, gently pull the webcam module away from the double-sided tape on the display enclosure (1) and disconnect the webcam cable from the module (2).
Page 111
Remove the display panel from the housing (2). Remove the six Phillips PM2.0×3.0 screws (1) that secure the display hinges to the display panel, and then remove the display hinges (2). The left and right display hinges are available in the Hinge Kit, spare part number 598679-001 for computers with 15.6-in displays.
Page 112
Remove the webcam cable (3) from the raceway and then, remove the cable assembly (4). NOTE: The cables are attached to the display panel with adhesive tape. To remove the WLAN and WWAN antennas: Peel the WLAN (1) and WWAN (2) antenna receivers from the housing. Route the antenna cables (3) out of the routing channels in the inside of the display housing.
Top cover NOTE: The top cover removal procedures differ for 17.3-in and 15.6-in computers. Description Spare part number Top cover for use in computers with 17.3-in displays 598683-001 Top cover for use in computers with 15.6-in displays 598682-001 Before removing the top cover, follow these steps: Shut down the computer.
Page 114
Disconnect the power button board cable from the system board by releasing the ZIF connector (1), and then disconnecting the cable (2). Remove the 17 Torx M2.5×6.0 screws that secure the top cover to the computer. 104 Chapter 4 Removal and replacement procedures Downloaded from LpManual.com Manuals...
Page 115
Remove the ExpressCard bezel (1), then angle the top cover up (2), and lift it up (3) until it disengages from the base enclosure. Remove the top cover on 15.6-in computers: Position the computer right-side up with the front toward you. Disconnect the power button board cable from the system board by releasing the ZIF connector (1), and then disconnecting the cable (2).
Page 116
Remove the 10 Torx M2.5×6.0 screws that secure the top cover to the computer. Remove the ExpressCard bezel (1), then angle the top cover up (2), and lift it up (3) until it disengages from the base enclosure. Reverse this procedure to install the top cover. 106 Chapter 4 Removal and replacement procedures Downloaded from LpManual.com Manuals...
RTC battery Description Spare part number 616073-001 RTC battery Before removing the RTC battery, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect all external devices connected to the computer.
Page 118
Release the RTC battery from the socket (1) on the system board and lift the battery (2) up. Reverse this procedure to install the RTC battery. 108 Chapter 4 Removal and replacement procedures Downloaded from LpManual.com Manuals...
Cable Kit spare part number information. Description Spare part number HP Integrated Bluetooth 2.1 module for use in all countries and regions except Japan and Asia 537921-001 Pacific countries and regions Before removing the Bluetooth module, follow these steps: Shut down the computer.
Remove the Bluetooth antenna (3) from the base enclosure. Reverse this procedure to install the Bluetooth module. Modem module Description Spare part number For use in all countries and regions except Australia and New Zealand 510100-001 For use only in Australia and New Zealand 510100-011 Before removing the modem module, follow these steps: Shut down the computer.
Page 121
Remove the power button board cable (see Power button board on page 63). Remove the speakers (see Speakers on page 65). Remove the thermal shield (see Thermal shield on page 67). Remove the display assembly (see Display assembly on computers with 17.3-in displays on page 89 Display assembly on computers with 15.6-in displays on page 96).
Audio board NOTE: The spare part number for the audio board is 598684-001. Before removing the audio board, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect all external devices connected to the computer.
Page 123
Remove the audio board (4) by pulling the module straight up and off the computer. Reverse this procedure to install the audio board. Component replacement procedures 113 Downloaded from LpManual.com Manuals...
System board NOTE: The system board spare part kit includes replacement thermal material. Description Spare part number System board with UMA graphics and RTC battery 598667-001 System board with UMA graphics, WWAN capability, and RTC battery 598669-001 System board with discrete graphics and RTC battery 598668-001 System board with discrete graphics, WWAN capability, and RTC battery for use in 4720s models 598670-001...
Page 125
Remove the hard drive (see Hard drive on page 87). Remove the top cover (see Top cover on page 103). When replacing the system board, be sure that the following components are removed from the defective system board and installed on the replacement system board: ●...
Page 126
Disconnect the power cable (1) from the system board and the connector (2) from the computer. Disconnect the RJ11 cable (1) from the system board and the connector (2) from the computer. 116 Chapter 4 Removal and replacement procedures Downloaded from LpManual.com Manuals...
Remove the screw (1) that secures the USB to the computer, disconnect the cable (2) from the system board and then, remove the device (3) from the computer. Reverse this procedure to install the system board. USB connector assembly NOTE: The USB connector assembly is included in the Cable Kit, spare part number 603188-001 for computers with 17.3-in displays and in 599807-001 for computers with 15.6-in displays.
Page 128
Remove the thermal shield (see Thermal shield on page 67). Remove the display assembly (see Display assembly on computers with 17.3-in displays on page 89 Display assembly on computers with 15.6-in displays on page 96). Remove the palm rest (see Palm rest on page 84).
RJ-11 connector assembly NOTE: The RJ-11 connector assembly is included in the Base Cable Kit, spare part number 603188-001 for 17.3-in computers and 599807-001 for 15.6-in computers. Before removing the RJ-11 connector assembly, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
Lift the R-11 connector (2) from its holder and out of the base enclosure. Reverse this procedure to install the RJ-11 connector assembly. Power connector assembly NOTE: The power connector assembly is included in the Base Cable Kit, spare part number 603188-0001 for computers with 17.3-in displays and 599807-001 for computers with 15.6-in displays.
Page 131
Thermal shield (see Thermal shield on page Display assembly (see Display assembly on computers with 17.3-in displays on page 89 Display assembly on computers with 15.6-in displays on page Palm rest (see Palm rest on page Hard drive (see Hard drive on page Top cover (see Top cover on page 103)
Computer Setup Computer Setup Starting Computer Setup Computer Setup is a preinstalled, ROM-based utility that can be used even when the operating system is not working or will not load. NOTE: Some of the Computer Setup menu items listed in this guide may not be supported by your computer or your operating system.
NOTE: You can use either a pointing device (TouchPad, pointing stick, or USB mouse) or the keyboard to navigate and make selections in Computer Setup. Press to enter BIOS Setup. Select the File, Security, or System Configuration menu. To exit Computer Setup menus, choose one of the following methods: ●...
Computer Setup menus The menu tables in this section provide an overview of Computer Setup options. NOTE: Some of the Computer Setup menu items listed in this chapter may not be supported by your computer or your operating system. File menu Select To do this System Information...
Page 135
Select To do this Ignore Changes and Exit Cancel any changes entered during the current session. Then exit and restart the computer. Save Changes and Exit Save any changes entered during the current session. Then exit and restart the computer. Your changes go into effect when the computer restarts.
Change Password Enter, change, or delete a BIOS administrator password. HP SpareKey Enrollment Enroll or reset HP SpareKey, which is a set of security questions and answers used if you forget your password. Anti Theft > AT-p (select models only) Enable/disable Anti-theft Protection.
System Configuration menu NOTE: Some of the listed System Configuration options may not be supported by your computer or your operating system. Select To do this Language Change the Computer Setup language. ● Boot Options Set a startup menu delay (in seconds). ●...
Page 138
Select To do this ● Device Configurations Enable/disable USB legacy support (enabled by default). When enabled, USB legacy support allows the following: ◦ Use of a USB keyboard in Computer Setup even when a Windows operating system is not running. ◦...
Page 139
Availability of these options above varies by computer model. ● Enable/disable secondary battery fast charge (enabled by default). ● Enable/disable HP QuickLook 2 (enabled by default). ● Enable/disable preboot authentication on HP QuickLock boot (enabled by default). ● Enable/disable HP QuickWeb (enabled by default).
Page 140
Select To do this ● Built-In Device Options Enable/disable the wireless button state (enabled by default). ● Enable/disable embedded WWAN device (select models only; enabled by default). ● Enable/disable embedded WLAN device (enabled by default). ● Enable/disable embedded Bluetooth device (enabled by default).
Page 141
Select To do this NOTE: Port Options All port options are enabled by default. ● Enable/disable the serial port (select models only). ● Enable/disable the parallel port (select models only). ● Enable/disable the flash media reader. ● Enable/disable the USB port. CAUTION: Disabling the USB port also disables MultiBay devices and ExpressCard devices on the...
Specifications Computer specifications Metric U.S. Dimensions – 15.6-in 24.96 cm Depth 9.83 in Width 37.18 cm 14.6 in 2.77 to 3.55 cm Height (front to rear) 1.09 to 1.40 in Dimensions – 17.3-in 26.64 cm Depth 10.49 in Width 41.60 cm 16.17 in 2.82 to 3.60 cm Height (front to rear)
Metric U.S. -15 m to 3,048 m Operating -50 ft to 10,000 ft Nonoperating -15 m to 12,192 m -50 ft to 40,000 ft Shock Operating 125 g, 2 ms, half-sine Nonoperating 200 g, 2 ms, half-sine Random vibration Operating 0.75 g zero-to-peak, 10 Hz to 500 Hz, 0.25 oct/min sweep rate Nonoperating...
15.6-in display specifications Metric U.S. Dimensions 21.0 cm Height 8.3 in Width 35.98 cm 14.2 in 39.1 cm Diagonal 15.6 in Number of colors Up to 16.8 million Contrast ratio 500:1 (min BrightView), 300:1 (min AntiGlare)) Brightness 200 nits (typical) Pixel resolution Format 1366 ×...
Hard drive specifications 750-GB* 640-GB* 500-GB* 320-GB* 250-GB* Dimensions 9.5 mm 9.5 mm 9.5 mm 9.5 mm 9.5 mm Height Width 70 mm 70 mm 70 mm 70 mm 70 mm 101 g 101 g 101 g 101 g 101 g Weight Interface type SATA...
DVD-ROM Drive specifications Applicable disc DVD-ROM (DVD-5, DVD-9, DVD-10, DVD-18, CD-ROM (Mode 1 and 2), CD Digital Audio, CD-XA ready (Mode 2, Form 1 and Form 2), CD-I (Mode 2, Form 1 and Form 2), CD-R, CD-RW, Photo CD (single and multisession), CD-Bridge Access time Random <...
NOTE: For detailed instructions, perform a search for these topics in Help and Support. NOTE: In case of system instability, HP recommends that you print the recovery procedures and save them for later use. Backing up your information Recovery after a system failure is as complete as your most current backup. You should create system repair discs (select models only) and your initial backup immediately after software setup.
Page 150
Note the following when backing up: ● Store personal files in the Documents folder, and back it up regularly. ● Back up templates that are stored in their associated programs. ● Save customized settings that appear in a window, toolbar, or menu bar by taking a screen shot of your settings.
Driver Recovery disc (both purchased separately). For additional information, refer to the “Using a Windows 7 operating system DVD (purchased separately)” section in this guide. If the Windows partition and the HP Recovery partition are listed, restart the computer, and then press before the Windows operating system loads.
Software not installed at the factory must be reinstalled. To recover the original hard drive image using f11, follow these steps: If possible, back up all personal files. If possible, check for the presence of the HP Recovery partition. To find the partition, select Start > Computer. NOTE:...
NOTE: For detailed instructions, perform a search for these topics in Help and Support. NOTE: In case of system instability, HP recommends that you print the recovery procedures and save them for later use. Backing up your information Recovery after a system failure is as complete as your most current backup. You should create your initial backup immediately after software setup.
To create a screen shot: Display the screen you want to save. Copy the screen image: To copy only the active window, press alt+fn+prt To copy the entire screen, press fn+prt Open a word-processing document, and then select Edit > Paste. The screen image is added to the document.
If possible, back up all personal files. If possible, check for the presence of the Windows partition and the HP Recovery partition. To find the partitions, select Start > Computer. NOTE:...
To recover the original hard drive image using f11, follow these steps: If possible, back up all personal files. If possible, check for the presence of the HP Recovery partition. To find the partition, select Start > Computer. NOTE: If the HP Recovery partition has been deleted, you must recover your operating system and programs using the Windows Vista operating system DVD and the Driver Recovery disc (both purchased separately).
NOTE: For detailed instructions, perform a search for these topics in Help and Support. NOTE: In case of system instability, HP recommends that you print the recovery procedures and save them for later use. Backing up your information Recovery after a system failure is as complete as your most current backup. You should create your initial backup immediately after software setup.
The recovery process reinstalls the original operating system, software, and drivers. Software, drivers, and updates not installed by HP must be manually reinstalled. To recover your operating system and programs, follow these steps: If possible, back up all personal files.
Page 159
Turn on the computer. Follow the on-screen instructions to install the operating system. After the operating system is installed, remove the Operating System disc and insert the Driver Recovery disc. Follow the on-screen instructions to install the drivers and programs. Backup and recovery in Windows XP 149 Downloaded from LpManual.com Manuals...
Connector pin assignments Audio-in (microphone) Signal Audio signal in Audio signal in Ground Audio-out (headphone) Signal Audio out, left channel Audio out, right channel Ground 150 Chapter 8 Connector pin assignments Downloaded from LpManual.com Manuals...
External monitor Signal Red analog Green analog Blue analog Not connected Ground Ground analog Ground analog Ground analog +5 VDC Ground Monitor detect DDC 2B data Horizontal sync Vertical sync DDC 2B clock External monitor 151 Downloaded from LpManual.com Manuals...
HDMI Signal Transition minimized differential signal (TMDS) data 2+ TMDS data 2 shield TMDS data 2– TMDS data 1+ TMDS data 1 shield TMDS data 1– TMDS data 0+ TMDS data 0 shield TMDS data 0– TMDS clock+ TMDS clock shield TMDS clock- Consumer electronic control (CEC) Not connected...
Power cord set requirements The wide range input feature of the computer permits it to operate from any line voltage from 100 to 120 volts AC or from 220 to 240 volts AC. The 3-conductor power cord set included with the computer meets the requirements for use in the country or region where the equipment is purchased.
Requirements for specific countries and regions Country/region Accredited agency Applicable note number Australia EANSW Austria Belgium CEBC Canada Denmark DEMKO Finland FIMKO France Germany Italy Japan METI The Netherlands KEMA Norway NEMKO The People's Republic of China South Korea Sweden SEMKO Switzerland Taiwan...
When you remove these components, handle them carefully. NOTE: Materials Disposal. This HP product contains mercury in the backlight in the display assembly that might require special handling at end-of-life. Disposal of mercury may be regulated because of environmental considerations. For disposal or recycling information, contact your local authorities, or see the Electronic Industries Alliance (EIA) Web site at http://www.eiae.org.
Page 168
Perform the following steps to disassemble the display assembly: Remove all screw covers (1) and screws (2) that secure the display bezel to the display assembly. Lift up and out on the left and right inside edges (1) and the top and bottom inside edges (2) of the display bezel until the bezel disengages from the display assembly.
Page 169
Disconnect all display panel cables (1) from the display inverter and remove the inverter (2). Remove all screws (1) that secure the display panel assembly to the display enclosure. Remove the display panel assembly (2) from the display enclosure. Turn the display panel assembly upside-down. Remove all screws that secure the display panel frame to the display panel.
Page 170
Remove the display panel frame (2) from the display panel. Remove the screws (1) that secure the backlight cover to the display panel. Lift the top edge of the backlight cover (2) and swing it outward. Remove the backlight cover. Turn the display panel right-side up.
Page 171
Remove the backlight cables (1) from the clip (2) in the display panel. Turn the display panel upside-down. WARNING! The backlight contains mercury. Exercise caution when removing and handling the backlight to avoid damaging this component and causing exposure to the mercury. Remove the backlight frame from the display panel.
Page 172
Remove the backlight from the backlight frame. Disconnect the display panel cable (1) from the LCD panel. Remove the screws (2) that secure the LCD panel to the display rear panel. Release the LCD panel (3) from the display rear panel. Release the tape (4) that secures the LCD panel to the display rear panel.
Index base enclosure, spare part wireless button 130 AC adapter number 29 WLAN device identifying 19 battery WWAN device spare part numbers 36 identifying 19 buttons AC adapter light, identifying 15 removal 55 power 12 AMT options spare part number 29, 55 AMT setup prompt (Ctrl-P) 131 battery bay 16 cables, service considerations 49...
Page 174
150 caps lock 11 LightScribe heat sink drive 14 precautions 49 removal 78 HP QuickLook 11 removal 61 spare part number 78 HP QuickWeb 11 spare part number 30, 35, 61 hinge, spare part optical drive 15 specifications 137...
Page 175
Media Card Reader, panels, product description 2 set requirements 155 identifying 14 passwords 126 spare part numbers 36, 38 memory module pin assignments power light, identifying 11 product description 3 audio-in jack 150 power requirements, product removal 60 audio-out (headphone) description 6 spare part numbers 29, 60 jack 150...
Page 176
126 system diagnostics 124 wireless antenna, HP SpareKey 126 system fan 128 disconnecting 74, 76 HP SpareKey enrollment 126 system IDs 126 wireless light, identifying 11 password policy 126 system information 124 wireless, product description 5 set up BIOS administrator...
Need help?
Do you have a question about the ProBook 4520s and is the answer not in the manual?
Questions and answers