Running The Dab Automatic Scan Manually; Presetting Radio Stations - Sony CMT-SBT20B Operating Instructions Manual

Running the DAB
Automatic Scan manually
1
Press TUNING MODE 
repeatedly until "SCAN" appears.
2
 to perform scanning.
Press
Scanning begins. The scanning progress
is indicated as a percentage. Depending
on the DAB/DAB+ services available in
your area, scanning may take a few
minutes.
When scanning is complete, a list of
available services is created.
Note
• If your country or region does not support
DAB/DAB+ broadcast, "NO SERV" appears.
• This procedure clears all previously stored
presets.
• Before unplugging the DAB/FM antenna, make
sure the system is turned off to preserve your
own DAB/DAB+ settings.
16
GB
Presetting radio
stations
You can preset your desired radio stations.
1
Tune to the desired station.
2
Press TUNER MEMORY  .
3
Press PRESET +/–  repeatedly
to select a preset number, then
 .
press
You can also select a preset number by
pressing TUNER MEMORY number (1 to
4)  or  /  /  /   .
"COMPLETE" appears on the display 
and the radio station is registered with
the preset number.
Repeat the steps above to register
further radio stations.
Tip
• You can preset up to 20 DAB/DAB+ and 20 FM
stations.
• If you select an already-registered preset number
in step 3, the preset radio station is replaced by
the currently tuned-in radio station.
Preset number