Hi-Speed Sync Triggering - Godox TT600 Instruction Manual

Using the Flash
8.

Hi-Speed Sync Triggering

Note:
*Hi-speed sync triggering mode is effective only when the flash
unit is used together with the following flash triggers.
1. Hi-speed sync trigger, e.g., Godox Cells II transceiver.
2. TTL wireless flash trigger X1C
3. TTL wireless flash trigger X1N
*Hi-speed sync triggering mode is not available when TT600 is
mounted onto the camera.
Godox Cells II transceiver
(Optional）
To avoid overheating or deteriorating the flash head during
high speed sync flash, the over-temperature protection function
will be activated automatically after 10 continuous high-speed
flashes and the ecycle time becomes 10 seconds longer.
● In S2 mode, the flash unit
can function as a slave flash for
creating multiple lighting effects.
It is applicable when using a TTL
master flash.
● In S2 mode, the flash unit will
ignore a single "preflash" from
the master flash and will only fire
in response to the second, actual
flash from the master.
● To enter
< > button and hold for 2
seconds.
● To exit mode, press Mode
Selection Button or long press
< > button and hold for 2
seconds again.
● In < > hi-speed sync triggering
mode, you can use a hi-speed
sync trigger to have your flash unit
synchronized with all shutter
speeds of cameras (max. 1/8000
second, up to your camera). This
is convenient when you want to
use aperture priority for fill-flash
portraits.
TTL wireless flash trigger
X1C /X1N (Optional）
mode, long press
- 29 -