Before Using Your Amplifier - ORANGE cr60c Owner's Manual

Always ensure the correct speaker load
operation. The speaker outputs are found on the rear of the amplifier and are wired in parallel. The minimum total
load is 8Ω. Only connect cabinets as described below.
Note:

Never use instrument cable to make speaker connections.

Use only quality, unshielded speaker cable.

Speaker cabinets must have power handling at least equal to the amplifier's rated output power.

Never use two cabinets of mismatched impedance

1 x 8Ω OR 1 x 16Ω

2 x 16Ω cabinets
The Crush Pro 60 and 120 Combos both have an internal speaker load of 16Ω. The internal speaker(s) is connected at
the factory. When using an extension cabinet, connect a

BEFORE USING YOUR AMPLIFIER

(Ω) is connected to the SPEAKER OUTPUT terminal(s) at all times during
cabinet connected to either SPEAKER OUTPUT terminal.
connected to either SPEAKER OUTPUT terminal.
CR120C & CR60C Combos
CRUSH PRO SERIES OWNERS MANUAL
CR60C, CR120C & CR120H
(Ω).
CR120 Head
16Ω extension cabinet to the other speaker output.
4