Safety Reset Switch - Midea MDV07 User Manual

CONTROL FEATURES AND FUNCTIONS
6 Anti-Crease
The Anti-Crease feature is designed to minimise the creasing that occurs when the clothes are left
to sit in the dryer.
After the cycle has finished, the drum will intermittently rotate so that the clothes do not settle in
one position.
Standard Anti-crease phase is 30 minutes. If Anti-Crease button is selected, this process will be
extended to 2 hours.
Program guide
Program
Mix
Cotton
Delicate fabric and those prone to
Synthetic
1 HR

SAFETY RESET SWITCH

There is a safety cut out switch located at the back of the unit. If the dryer over heats, this switch will
activate and operation of the dryer will cease. This button must be reset before operation of the dryer
can resume.
Allow at least 10 minutes for the dryer to cool down before attempting to reset the safety switch.
Locate the white button along the back of the unit and press firmly until you feel the reset click.
The cut out switch may activate for the following reasons:
- Lint filter is blocked
- Exhaust outlet is blocked
- Poor ventilation in the room
- A lightweight garment has been sucked over the lint filter
The most common reason for the dryer to overheat is a blocked filter. Be sure to clean the lint filter
after each load to prevent overheating the appliance.
Fabric type
Mixed fabric types
Heavy and durable fabrics
ie: towels and denims
shrinking
Quick drying fabrics
Max. Load
(kg)
7
7
3.5
1
11
Dryness Level
Medium / Extra
Light / Medium / Extra
Medium / Extra
-