Nokia M1122 User Manual page 22

terminates the tunnel and all data from that terminated local PPTP
tunnel will be forwarded to an assigned ATM VCC by using PPP over
AAL5 encapsulation. Thus, each local PPTP tunnel requires an
equivalent ATM VCC assigned to it restricting the total number of
local PPTP hosts to 8.
Local tunneling is used when there is a need to have one or more
computers connected independently to different networks. For
example, in remote work application, the rest of the family may be
using the common ISP services and one or two family members need to
gain access to their corporate networks. With local tunneling, these
remote workers may be connected to a different network than the rest
of the users.
Local tunneling is activated using the PPTP client running, for
example, in Windows The destination IP address must be M1122
LAN/VBRIDGE IP address depending on the configuration. PPP
packets within PPTP are mapped to the configured VCC. M1122 has
three different ways to choose the ATM VCC that will be used for
tunneling:
D
Automatic, chooses the first free VCC
D
Chooses the VCC number using C:number, where number is from
1 to 8. C:number is fed after the M1122 IP address (see Figure 16).
D
Chooses the VCC number using N:name, where name is the
VCCx description. N:name is fed after the M1122 IP address.
Figure 16
C33906002SE_00
Choosing the VCC2 for tunneling example
E Copyright Nokia Networks Oy
21