Canon HR10 Instruction Manual page 79

dark the assist lamp may light up briefly
in order to enable the camcorder to
focus more accurately (AF-assist lamp).
You can also set [AF AST LAMP] to
[ OFF] so the assist lamp does not
light up (
- The camcorder may not be able to
focus even if the AF-assist lamp is on.
- The brightness of the AF-assist lamp
could be an inconvenience. Consider
turning it off in public places such as
restaurants.
Continuous Shooting and Exposure
Bracketing (Drive Mode)
Take a series of pictures of a moving
subject or record the same picture in 3
levels of exposure in order to choose
later the picture you like the best.
POINTS TO CHECK
Mode switch: P (except for the
[ FIREWORKS] recording program).
Maximum number of continuous shots
Number of frames (shots) per second
Normal speed
High speed
Using the flash
These figures are approximate and vary with the recording conditions and subjects.
The actual number of frames per second will be lower when
is displayed on the screen.
Downloaded From VideoCamera-Manual.com Manuals
49).
3 frames
5 frames
2.1 frames
Options
[ SINGLE]
Records a single still image.
[ CONT.SHOOT.] (Continuous Shooting),
[ HISPEED CONT.SHOOT. ]
(High-Speed Continuous Shooting)
Captures a series of still images as long as you
hold PHOTO
of frames per second, refer to the sidebar on
page 79.
[ AEB] (Auto Exposure Bracketing)
The camcorder records a still image in three
different exposures (dark, normal, light in 1/2
EV steps), allowing you to choose the shot you
like the best.
FUNC.
( 27)
FUNC.
( 26)
FUNC.
Maximum number of continuous shots
Default value
pressed down. For the number
Icon of the currently selected
Drive Mode
Desired option
60 images
(camcorder shake warning)
79