Download
Share
Print this page
Amica AMM 25 BI Installation Manual
  1. Manuals
  2. Brands
  3. Amica Manuals
  4. Microwave Oven
  5. AMM25BI
  6. Installation manual

Amica AMM 25 BI Installation Manual

Hide thumbs Also See for AMM 25 BI:
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual See also: Instruction Manual
IO 00507
AMM 25 BI
Installation Manual
Microwave Oven
Before using the microwave, please carefully read this manual.

Advertisement

loading
Need help?

Need help?

Do you have a question about the AMM 25 BI and is the answer not in the manual?

Questions and answers

Related Manuals for Amica AMM 25 BI

Summary of Contents for Amica AMM 25 BI

  • Page 1 IO 00507 AMM 25 BI Installation Manual Microwave Oven Before using the microwave, please carefully read this manual.

  • Page 3: Dear Customer

    DEAR CUSTOMER, Please read this manual carefully before you start to use this microwave. This way, you can ensure its proper and correct operation. Please preserve this manual and store it near the appliance, so that it is available at all times for reference. Observe the instructions contained herein to prevent accidents.
  • Page 4 ACCESSORIES Rib on the upper guide Decorative masking frame Mounting screws rear bracket Fixing screw Decorative cap Important! Do not block any air ventilation openings at the back of the unit and betwe- en the oven and the decorative frame.
  • Page 5 INSTALLATION IN FURNITURE UNIT Cabinet should not have the rear wall behind the microwave oven (see figure). Installation of microwave oven above a conventional oven...

  • Page 6: Installation Of Microwave Oven

    INSTALLATION OF MICROWAVE OVEN Height of furniture recess should be 380 + 2 mm. When inserting the oven into the cabinet recess, there should be a small gap between the upper wall of the recess and ribbed top oven guide to facilitate installation.
  • Page 7 INSTALLATION OF MICROWAVE OVEN Make a paper mounting template before instal- lation to map a suitable distance from the edge of the cabinet and centre the rear bracket. After deter- mining the appropriate position the bracket, drill two holes (Φ 3mm) for the bracket.
  • Page 8 IO 00507...