Subscribe to Our Youtube Channel
Related Manuals for Home Protector CCTV
Summary of Contents for Home Protector CCTV
-
Page 1: User Guide
USER GUIDE 4-Camera CCTV Kit (Aldi Product Ref: 069803022874100) Page 1 HP-4960-1TB: v1.0... - Page 2 Introduction The Home Protector CCTV kit is designed specifically for security and surveillance in the home or small business. It uses an embedded LINUX operating system with the standard H.264 video compression format and G.711A audio compression format ensuring the highest quality image and low error coding ratio.
- Page 3 Part One: Basic Operation Connecting the System Page 3 HP-4960-1TB: v1.0...
- Page 4 2. Powering on the DVR Plug in the power supply and turn on; the red power light indicates the DVR is now powered on. When the startup is completed you will hear a beep, and the default setting for video output is a multiple-window display showing the cameras.
- Page 5 Picture1 login NB: If the password is entered incorrectly seven times, he alarm will sound. (By restarting the DVR or after 30 minutes, the account will be unlocked automatically). For your security, please set a password in [Main Menu]>[Account]>[Modify Pwd] after first login. 5.
- Page 6 6. Recording Configuration The DVR will default to record permanently from all connected cameras. Alternatively you can set the recording parameters in the Record Configuration menu. Select [Main Menu]> [Record]> [Record Config] to set. Picture 2 - Record Config 【Channel】Choose the corresponding channel number to set the channel.
- Page 7 【Prerecord】Record 1-30 seconds before the action. (file length is determined by the code stream) 【Mode】Set record mode: schedule, manual or stop. Schedule ： Record according to the set video mode (regular, detect and alarm) and time selection. Manual：Click the “all” button and set the corresponding channel recording no matter it is in any state.
- Page 8 Alarm：Trigger the external alarm signal in the set time section. When above alarm is set as opening recording, the “detection recording” state is on. The video file type is “A”. 7. Snapshot Storage. (partial devices supported) Setup snapshot parameters for different channels. please go to [Main Menu]>[Record]>[Snapshot Storage] for ther appropriate settings.
- Page 9 8. Video Playback There are two methods for you to play the video files in the hard disk. 1. In the desktop shortcut menu. 2. Main Menu>Record>Playback. NB: The hard disk used to store the video files must be set as read-write or read-only state. Picture4 - Video Playback Page 9 HP-4960-1TB: v1.0...
-
Page 10: Full Screen
1. File option: Choose the file to playback/backup. 2. File information: Start time, end time and file size. 3. File Backup: Backup files from HDD. 4. Switch: switch to the search interface. 5. Playback control: Refer to picture below. 6. Operation hint: Display function at the cursor position. Button Function Button... - Page 11 9. Network Setup Picture 5 - Network Setup Perform network setup through; [Main Menu]>[System]>[Network] 【IP address】Default: 192.168.1.10 【Subnet Mask】Default: 255.255.255.0 【Gateway】Default: 192.168.1.1 For manual setup, ensure the DVR’s IP address and the Gateway are in the same network IP range. For automatic setup with your router, check the DHCP Enable box and after approx.
- Page 12 10. Alarm Setup Picture 6 - Motion Detection Example: Set DVR to alarm mode, create a linkage record and set the PTZ turn to a preset position when there is a moving object in designated areas during Monday to Friday. Select【Main Menu】>【Alarm】>【Alarm Set】...
- Page 13 Set the other channel alarm parameters following steps 2 and 3. NB: Video Loss & Video Blind setup method is similar to Motion Detect. 11. PTZ Control Select 【Main Menu】 > 【System】 > 【PTZ Config】 and set basic parameters such as channel and protocol.
Need help?
Do you have a question about the CCTV and is the answer not in the manual?
Questions and answers