Voice Commands; Voice Command Settings - Nokia NAVIGATOR 6710 User Manual

16. Voice commands

Before using voice tags, note the following:
● Voice tags are not language-dependent. They are
dependent on the speaker's voice.
● You must say the name exactly as you said it when you
recorded it.
● Voice tags are sensitive to background noise. Record voice
tags and use them in a quiet environment.
● Very short names are not accepted. Use long names, and
avoid similar names for different numbers.
Note: Using voice tags may be difficult in a noisy
environment or during an emergency, so you should not rely
solely upon voice dialling in all circumstances.
You can use voice commands to make phone calls, launch
applications, and activate profiles.
The device creates a voice tag for contacts, profiles, and
applications. Voice commands are not dependent on a
speaker's voice; however, the voice recognition in the device
adapts to the main user's voice to recognise voice commands
better.
To use a voice command, press and hold the right selection
key, and clearly say the voice command. If the device does
not recognise the voice command correctly, select from the
list of other matches, or Quit to cancel.
64

Voice command settings

Select > Settings > Voice comm..
Select Options > Settings and from the following:
● Synthesiser — Activate the synthesiser that plays
recognised voice commands.
● Playback volume — Adjust the speech volume.
● Recognition sensitivity — Adjust the voice command
recognition sensitivity.
● Command verification — Select whether the voice
commands are accepted automatically, manually, or by
voice verification.
● Remove voice adapts. — Reset voice recognition
learning when the main user of the device has changed.
© 2009 Nokia. All rights reserved.