Wireless Bridge - SAGEMCOM F@ST 4310 Reference Manual

5- Information / Configuration

5.8.4 Wireless Bridge

Object: This menu is used to configure wireless bridge features of the wireless LAN interface
• In the Wireless menu, select Wireless Bridge.
The following screen opens:
Field
AP Mode
Bridge Restrict
Remote Bridges
MAC Address
Page 5-110
Select:
• Wireless Bridge to set the CPE as a bridge in your
WDS network,
• Access Point enables access point functionality.
Select one of the following options:
• Disabled to disable wireless bridge restriction.
Note: Any wireless bridge will be granted access.
• Enabled or Enabled(Scan) to enable wireless
bridge restriction.
Enter the bridges MAC addresses which must be
granted access.
Sagemcom Broadband SAS document. Reproduction and disclosure prohibited
Action/Meaning
Default
value
Access
Point
Enabled
-
F@ST 4310 Reference Manual