Operation; Remove The Blade Sheath - Spear & Jackson HT500 Instruction Manual

oPeraTIon

generaL oPeraTIon
Check the product, its power cord and plug as well as
■
accessories for damage before each use. Do not use the
product if it is damaged or shows wear.
Double check that accessories or cutting device are properly
■
fixed.
Always hold the product by its handles. Keep the handles dry to
■
ensure safe support.
Ensure that the air vents are always unobstructed and clear.
■
Clean them if necessary with a soft brush. Blocked air vents
may lead to overheating and damage the product.
Switch the product off immediately if you are disturbed while
■
working by other people entering the working area. Always let
the product come to complete stop before putting it down.
Do not overwork yourself. Take regular breaks to ensure you can
■
concentrate on the work and have full control over the product.
WarnIng
and eyes protecting when working with the
equipment. Ensure that the mains voltage value
matches the label on the equipment.

remove the blade sheath

Remove the blade sheath (A) from the blade (B)
of appliance carefully .
12 AFTER sAlEs suppoRT 01904 727505 www.spearandjackson-power.com
- Wear suitable clothing, ears
B
a