Chapter 5 Configuration; Configure The Switch Via Gui - TP-Link T2600G-28TS Installation Manual

Jetstream gigabit l2 managed switch

Hide thumbs Also See for T2600G-28TS:

Table of Contents

Gigabit L2 Managed Switch

Chapter 5 Configuration

Configuration

1. To access the GUI of the switch, open a web browser and type the default

management address http://192.168.0.1 in the address field of the browser, then

press the Enter key.

Note: To log on to the GUI of the switch, the IP address of your PC should be set in

the same subnet addresses of the switch. The IP address is 192.168.0.x ("x" is any

number from 2 to 254), Subnet Mask is 255.255.255.0.

For the detailed instructions as to how to do this, please refer to Appendix B in the

User Guide on the Resource CD.

2. Enter admin for the default User Name and Password, both in lower case letters.

Then click the Login button or press the Enter key.

3. After a successful login, the main page will appear as the following figure, and you

can configure the function by clicking the setup menu on the left side of the screen.

Figure 5-3 Main Page of the Switch

Figure 5-1 Web Browser

Figure 5-2 Login

Table of Contents

Show Quick Links

Table of Contents

Do you have a question about the T2600G-28TS and is the answer not in the manual?

T2600g-52ts