OTHER EXTERNAL COMPONENTS
OTHER EXTERNAL COMPONENTS
Using external audio/video
players—AV-IN
When the operation buttons are
not displayed on the screen, touch
the area shown on the illustration.
• To change settings for video
playback, see page 49.
❏ Starting playback
Preparation:
"AV-IN" cannot be selected when <iPod Setup>
is set to [USB+AV-IN]. Be sure to select [USB 1
Wire] for <iPod Setup> beforehand. (Page 23)
1
Connect an external component to the
iPod/AV-IN input terminal. (Page 65 )
2
Select "AV-IN" as the source. (Page 12)
3
Turn on the connected component and
start playing the source.
❏ Changing the AV-IN name
You can change the AV-IN name displayed on the
"AV-IN" source control screen.
1
Display the <VIDEO Mode> screen.
2
Select an AV-IN name.
• This setting does not affect the source name
displayed on the Home screen.
ENGLISH
35