Installing The Speakers On The Tallboy Stand - Samsung HT-F5500K User Manual

HT-F5550K
Front/Surround x 4

Installing the Speakers on the Tallboy Stand

* HT-F5550K only - Front/Surround Speakers
1. Turn the Stand Base upside-down and connect it
to the Stand.
2. Use the driver to combine the screws on the 3
marked holes.
3. Straighten a supplied speaker wire to the gravity
direction and put in the hole on the centre of Stand
Base.
4. Connect the upper Speaker to the assembled
Stand.
5. Insert a screw clockwise into the hole on the rear of
the speaker using a screwdriver.
And then connect a speaker cable.
6. This is the appearance after the speaker is installed.
Follow this steps to install other speaker.
Screw (5
X
Stand x 4 Stand Base x 4
20) 16
X
Speaker Cable x 6
Centre
1
Stand Base
Stand
3
5
Subwoofer
2
4
Speaker
Stand
6
15
|
English