4. For leaving the plasma panel from the front frame, pull the
bottom of the cabinet assy forward, lift, and remove.
7.19. Remove the S-Board
1. Remove the screws (×2
unit.
2. Disconnect the connector (S2).
3. Remove the screw (×1
) and remove the S-Board
).
4. Remove the S-Board from the Power button bracket.
5. Remove the claws (×2
6. Remove the Power button from the Power button bracket.
7.20. Remove the K-Board
1. Remove the screws (×2
2. Remove the claw (×1
3. Disconnect the connector (K1) and remove the K-Board
from LED Panel.
23
).
).
).