Factory Reset - Foscam FI9821W User Manual

CAUTION: If your camera works well with the current firmware, we recommend not upgrading. Please don't
upgrade the firmware unnecessarily. Your camera may be damaged if mis-configured during an upgrade.
NOTE:
4) Please ensure you have download the correct firmware package for your camera before upgrading. Read
the upgrade documentation (readme.txt file) in the upgrade package before you upgrade.
5) Upon downloading the firmware check the sizes of the .bin files. They must match the size in the
readme.txt file. If not, please download the firmware again until the sizes are the same. Your camera will
not function correctly if a corrupt .bin file is used.
6) Normally, only Device WEB UI need to be upgrade, please do not try to upgrade the Device System
Firmware.
7) Never shut down the power of the camera during upgrade until the IP camera restart and get connected.
8) After upgrade successfully, please uninstall the old plugin and re-install it, then reset the camera to the
default factory settings before using the camera.
NOTE：
The firmware of FI9821W V2.1 can not be used in FI9821W V2. For the model of your device, please
refer to the MAC stickers on bottom of your device.

4.9.3 Factory Reset

Click All reset and all parameters will return to factory settings if selected. This is similar to press the Reset
button on the bottom of the camera..
Foscam Digital Technologies
Telephone: 1-800-930-0949
Figure 4.84
www .foscam. us
www .foscam. us
77