3. Other Essential Functions
Setting the time
1. Press M (
) and use b to access
M (
).
2. Use b to access
3. Use b to scroll to
press M (
).
4. Key in the time, e.g. 0, 8, 3, 0
for 8:30.
5. Press M ( ) to confirm. The time is
displayed in the right-hand corner of the display.
Note: The car phone does not contain its own battery, therefore
the setting will be lost if the voltage of the car battery is low.
Selecting a ringing tone
1. Press M (
).
2. Use b to access
3. Use b to access
4. Use b to scroll to the ringing tone you prefer. The phone
gives you a ringing sample. Press M ( ) to select it.
5. Press and hold c to exit the menu.
and press
, press M (
and
and press M (
).
and press M (
©
2001 Nokia Mobile Phones. All rights reserved.
In-call options
Your phone provides a number of control functions that you can
use during a call. You cannot utilise all of these functions at all
times. Only those functions which are available and enabled will
be shown in the in-call menu.
Many of the in-call options are network services.
).
While you have a call in progress, press M (
the in-call menu. If the Navi key text is
vate the text
The following in-call options may be available:
or
).
To exit the in-call menu, press c.
, press c to acti-
.
to hold or release a call
to make a call during an on-going call
to answer the incoming call
to reject the incoming call
to switch between the two calls
to end the active call
to send DTMF tones
to send the character string on the display to
the network
to end both calls
to enter the Phone book
Setting the time
) to enter
15