TP-Link TL-WR1043ND Quick Installation Manual

Quick Installation Guide

300Mbps Wireless N Gigabit Router
TL-WR1043ND
MODEL NO.
2
Con guration by Setup Wizard
The Easy Setup Assistant is not supported in Linux or Mac OS. If you are running Linux /Mac or without CD-ROM, please refer to
Appendix 2.
Insert the TP-LINK Resource CD into the CD-ROM drive.
1
Select TL-WR1043ND and click Easy Setup Assistant.
2
7106504272 REV2.0.0

Package Contents

TL-WR1043ND
Power Adapter
Ethernet Cable
Resource CD
300Mbps Wireless N Gigabit Router
MODEL NO. TL-WR1043ND
QIG
Select your language from the drop-down menu.
3
Click START and the Easy Setup Assistant will
guide you step by step to set up the Router.
4 Follow the instructions until you see the screen
below. Click FINISH to complete the setup.
1

Hardware Connection

Computer
Wireless On/Off 4 3 Ethernet 2 1 Internet
2
Connect the Internet port on the router to your Modem's
1
LAN port with an Ethernet cable.
Connect your computer to one of the Ehternet ports labeled
1~4 on the router with an Ethernet cable.
To use the router to share les or printer, plug an external USB hard
drive/USB ash disk into the USB port, or connect a USB printer to the
USB port. For speci c con guration procedures of the USB Printer,
please refer to Appendix 1.
Plug the provided Power Adapter into the Power jack and
3
the other end to a standard electrical wall socket.
Appendix 1: Con guring the USB Printer
The USB Printer Setup Wizard is currently supported in Windows 7 32/64bit, Windows Vista 32/64bit, Windows XP 32/64bit. Please follow
the steps below to finish the printer configuration. For Mac users, please go to our website www.tp-link.com to download the utility.
Insert the TP-LINK Resource CD into the CD-ROM drive.
1
Select TL-WR1043ND and click USB Printer Setup.
Click START and the USB Printer Setup Wizard will
2
guide you step by step to set up the USB Printer.
If you want more details about Print server, please refer to Print Server Application Guide downloaded from our website: www.tp-link.com.
Wall Socket
Internet
Cable/DSL Modem
USB On/Off Power WPS/Reset
3
1
4 3 Ethernet 2 1 Internet USB
USB ash disk
Printer
USB hard drive
* The printer function of the router is not
* Some USB hard drives that work at a high compatible with all printers. Please check the
power without using any external power latest compatibility list on our website to verify
adapter might not be supported. whether your printer model is supported.
Click Next and go on to install TP-LINK USB Printer
3
Controller．Then follow the instructions step by step.
Click Finish on the nal screen to complete the
4
installation for TP-LINK USB Printer Controller.
Power WPS/Reset
On/Off