Display Brightness; Display Switch-Off Status; Appliance Switch-Off Status; Display Maximum Load - Miele WMV 960 WPS Operating Instructions Manual

Display brightness

There are seven different display
brightness settings.
This will change as soon as a different
setting is chosen.

Display switch-off status

To save energy, the display goes out
and the indicator light for the Start/
Stop button will start flashing slowly.
Options
– On
The display will go out after 10
minutes.
– On (not in current programme)
(Factory default setting)
The display will remain on while the
programme is running but will go out
10 minutes after the end of the
programme.
– Off
The display will remain on.

Appliance switch-off status

The washing machine will switch off
automatically after the end of the
programme/Anti-crease phase or after
being switched on if no further
selection is made.
Options
– 15 minutes (Factory default setting)
The washing machine will switch
itself off after 15 minutes.
– 20 minutes
The washing machine will switch
itself off after 20 minutes.
– 30 minutes
The washing machine will switch
itself off after 30 minutes.

Display maximum load

After a programme is selected, the
maximum load appears in the display
for a short time. You can switch this
off.
Factory default setting: Display
maximum load is switched on.

Memory

The washing machine will save the
settings (temperature, spin speed and
some of the options) which have been
selected for a programme after the
programme has started.
When this programme is chosen again,
these saved settings will appear in the
display.
Factory default setting: the Memory
function is switched off.
Settings
107