Send Data Via Bluetooth - Nokia 3600 User Manual

17

Send data via Bluetooth

Note: There can be only one active Bluetooth connection at a time.
1 Open an application where the item you
wish to send is stored. For example, to send
a photo to another device, open the Images
application.
2 Scroll to the item you want to send, for
example, a photo and select Options→
Send→ Via Bluetooth.
3 The phone starts to search for devices
within range. Bluetooth enabled devices that are within range start
to appear on the display one by one. You can see a device icon, the
device's Bluetooth name, the device type, or a short name. Paired
devices are shown with
Note: If you have searched for Bluetooth devices earlier, a list of the
•
4 Scroll to the device you want to connect with and press Select. The item
you are sending is copied to Outbox and the note Connecting is shown.
5 Pairing (if not required by the other device, see step 6).
•
devices that were found previously is shown first. To start a new
search, select More devices. If you switch off the phone, the list
of devices is cleared and the device search needs to be started
again before sending data.
To interrupt the search, press Stop. The device list freezes and you
can start to form a connection to one of the devices already found.
Glossary: Pairing means authentication. The users of the Bluetooth
enabled devices should agree on the passcode and use the same
passcode for both devices in order to pair them. Devices that do
not have a user interface have a factory set passcode.
If the other device requires pairing before data can be transmitted,
a tone sounds and you are asked to enter a passcode.
.
[ 136 ]