Table of Contents
Advertisement
A-Class Server RAM Removal and Replacement
Overview
This section provides step-by-step instructions and general installation rules for
removing and replacing RAM boards in the A-Class Server. The following
subsections apply:
CAUTION
The procedures in this section require opening the system cabinet and exposing the
system to electrostatic discharge. Always observe all electrostatic precautions when
working with components inside or out of the cabinet. Failure to follow these
precautions may result in component damage or loss of system reliability.
Electrostatic Discharge Precautions
•
•
Before You Do Anything...
Step 1. Perform system backup.
Step 2. Shut down the operating system.
Chapter 3
A-Class Server RAM Removal and Replacement
"RAM Removal" on page 96
"RAM Replacement"
"RAM Removal and Replacement Rules"
Use a grounding mat and an anti-static wrist strap.
Wear the anti-static wrist strap to ensure that any accumulated electrostatic
charge is discharged from your body to ground.
A-Class System Service
95
Advertisement
Table of Contents
