Save Calling Card Information (Step 2) - Nokia 3360 User Manual

7
described in the following table.
Dialing sequence
Access no.
+ phone no.
+ card no.
Access no.
+ card no.
+ phone no.
Prefix
+ phone no.
+ card no.
7 Press Select.

Save calling card information (step 2)

The order of the following steps may vary, depending on which dialing
sequence your card uses.
1 Enter the number and, when prompted for the calling card's access
number, enter the number and press OK.
This number is usually the 1-800 number that is listed on the calling
card.
2 When prompted to enter a calling card number (usually shown on the
front of the calling card) and PIN number, enter the number, and press
OK.
3 Press OK again when the Save changes? message appears.
4 Use [graphic]
Use for cards that require you to
Dial 1-800 access number, then phone
number, then card number (+ PIN if
required).
Dial 1-800 access number, then card
number (+ PIN if required), then phone
number.
Dial the prefix (any numbers that must
precede the phone number) and phone
number you want to dial, then card
number (+ PIN, if required).
or [graphic] to scroll to Card name, press Select, and
[ 42 ]