Speaker Assembly - HP EliteBook 8560p Maintenance And Service Manual

NOTE:
bottom cover if the repaired unit includes a modem.

Speaker assembly

Description
Speaker assembly
Before removing the speaker assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a.
b.
c.
d.
e.
f.
g.
h.
i.
Remove the speaker assembly:
1. Position the bottom cover with the front toward you.
2. Remove the two Phillips PM2.0×3.0 screws (1) that secure the speaker assembly to the bottom
cover.
Downloaded from LpManual.com Manuals
When replacing the bottom cover, make sure to remove the modem plug from the slot in the
Battery on page
Bottom door (see Bottom door on page
Hard drive (see Hard drive on page
Optical drive (see Optical drive on page
WLAN module (see WLAN module on page
WWAN module (see WWAN module on page
Fan (see Fan on page 85)
Heat sink (see Heat sink on page
Keyboard (see Keyboard on page
Bottom cover (see Bottom cover on page
58).
64).
69)
65)
76)
74)
86)
92)
94)
Component replacement procedures
Spare part number
641186-001
99