Message Sending Process; Postcards; Flash Messages; Write A Flash Message - Nokia 3109 classic User Manual

M e s s a g i n g
1. To view the received message, select Show. To view it later, select Exit.
2. To view the whole message if the received message contains a presentation, select Play. To view the files in the presentation
or the attachments, select
3. To reply to the message, select
4. Create the reply message.
5. To send the message, select Send.

Message sending process

To send the message, select Send. The phone saves the message in the
Note: Your device may indicate that your message was sent to the message center number programmed into your
device. Your device may not indicate whether the message is received at the intended destination. For more details
about messaging services, contact your service provider.
If an interruption occurs while the message is being sent, the phone tries to resend the message a few times. If these attempts
fail, the message remains in the
message, and select Options

Postcards

With the postcard messaging service (network service), create and send postcards that may contain an image and a greeting
text. The postcard is sent to the service provider using multimedia messaging. The service provider prints the postcard and
sends it to the postal address given with the message. MMS must be activated before this service can be used.
Before you can use the postcard service, you must subscribe to the service. To check the availability and costs and to subscribe
to the service, contact your service provider.
To send a postcard, select
are marked by a *. Scroll to the image field, select
then write your greeting text. To send the message, select Send.

Flash messages

Flash messages are text messages that are instantly displayed upon reception. Flash messages are not automatically saved.

Write a flash message

Select Menu Messaging
>
The maximum length of a flash message is 70 characters. To insert a blinking text into the message, select
blink char. to set a marker. The text after the marker blinks. To end the blinking text range, insert a second marker.

Read and reply to a flash message

A received flash message is indicated with
To read the message, select Read.
To extract numbers and addresses from the current message, select
To save the message, select

Nokia Xpress audio messaging

You can use the MMS to create and send an audio message in a convenient way. MMS must be activated before you can use
audio messages.

Create a message

1. Select
Menu Messaging
>
recorder," p. 32.
2. Speak your message.
3. Enter one or more phone numbers in the
4. To send the message, select Send.

Listen to a message

To open a received audio message, select Play.
If more than one message is received, select
© 2007 Nokia. All rights reserved.
Options Objects or Attachments.
>
Options Reply
>
See "Message sending process," p. 16.
Outbox folder. To cancel the sending of the messages in the
Cancel sending.
>
Menu Messaging Create message
> >
Insert
Create message Flash
> >
Message:
Save and the folder in which you want to save it.
Create message
>
To: field, or select
Show
and the message type.
Outbox
> Postcard. Fill in the address; mandatory editor fields
and an image from the gallery, or
message. Enter the recipient's phone number and write your message.
and a few words from the beginning of the message.
Options
message. The voice recorder opens.
Audio
>
Add to retrieve a number.
> Play.
16
folder, and the sending starts.
Outbox folder, scroll to the desired
New image to insert a recent image;
Use detail.
>
See "Voice
Options Insert
>