Rear-Facing Webcam - HP 7 Plus G2 Maintenance And Service Manual

Rear-facing webcam

Description
Rear-facing webcam (2.0-MP, fixed-focus, HD; includes cable)
Before removing the rear-facing webcam, follow these steps:
1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the back cover (see
5. Disconnect the battery cable from the system board (see
Remove the rear-facing webcam:
1. Disconnect the rear-facing webcam cable (1) from the system board.
2. Remove the rear-facing webcam (2) and cable from the molding built into the display
panel assembly.
NOTE:
removing the rear-facing webcam, a replacement cover is available in the Rubber Kit, spare part
number 790598-001.
Reverse this procedure to install the rear-facing webcam.
Back cover on page
If the rear-facing webcam rubber lens cover (3) should become lost or damaged when
12).
Battery on page
Spare part number
790595-001
14).
Rear-facing webcam 19