Nokia 2116 User Manual page 64

run and the split time appears below the running time.
Each time you select Split, the new measured time
appears at the beginning of the list.
Lap timing—You can use the lap time function when
you want to track how long it takes to complete each
cycle or lap. Select
stops, then immediately returns to zero for the next
lap. The lap time appears below the running time. Each
time you select Lap, the new measured time appears
at the beginning of the list.
2
Select Stop to end timing and display total time.
Save, view or delete split and lap times
• To save a time while the clock is running select
Save, enter a name for the measurement, and select
OK. If you do not enter a name, the total time is used
as the default title for the lap or split time.
• To view the last measured time, in the standby mode,
select Menu >
or Lap timing
• To browse saved times, in the standby mode, select
Menu > Organizer
timing > View
• To delete a saved time, from Stopwatch, select
times > Select
by one or Delete
Copyright © 2005 Nokia.
64
Lap to note the lap time. The clock
Organizer > Stopwatch > Split timing
> Show last time.
> Stopwatch > Split timing
times.
> Delete or select Delete times
all.
All rights reserved.
Operation note
If you press the end key and return to the standby mode,
the clock continues to run in the background, and
appears in the upper left corner of the screen.
To return to the stopwatch, do the following:
1
In the standby mode, select
Stopwatch >Continue.
2
To stop the clock, select Stop.
Stop >
or Lap
View
> One
Menu > Organizer >